Timbren Helper Springs for a 2014 Nissan Frontier Desert Runner with Leaf Springs on Top of Axle

Question

Question:

Will this fit on a 2014 frontier desert runner edition? The springs are mounted over the axle on the desert runner

asked by: Tim

0

Expert Reply:

Timbren helper springs # TTORTUN4L are designed to fit on 2014 Nissan Frontier 4x4 trucks that have the leaf spring stack on top of the rear axle. Take a look at the installation instructions I have linked for you for more on how they install. I have also linked a review video on these springs and a link to our informational article on Timbren springs.

expert reply by: Michael H

0

click to enlarge

Answer 1

The Timbren Active Off-Road Bumpstops #TABSOSR referenced in your question feature an assembled height of 4-5/8 inches. I have attached a short video review on this kit along with the written installation instructions that you can check out as well.

view full answer...

Answer 2

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist. These…

view full answer...

Answer 3

When installing any Timbren system on the 2019 Toyota Tacoma you should have about 1/2" to 1-1/2" between the frame and the spring after installation. You won't necessarily be losing wheel travel when you use a Timbren Rear Suspension…

view full answer...

Answer 4

The Timbren Rear Suspension Enhancement Systems #TTORTUN4L and #TABSOSR are designed for a very high weight capacity at either 3,000lbs or 3,600lbs of capacity which will explain for the hard hits that were described. The 1,000lb Blue SumoSprings…

view full answer...

Answer 5

I have a great rear suspension enhancement solution for you. I checked in with both our air bag manufacturers (Air Lift and Firestone), and they currently do not have an air bag system designed to fit your rear axles of your 2022 Nissan Frontier Pro.…

view full answer...

Answer 6

If your 2012 Nissan Frontier has a 1.5" lift and you are looking to install the Timbren Active Off-Road Bumpstops #TABSOSR, you will need the 1" Spacer #A25723-90AH00. It should be noted that the included bolt should be long enough to…

view full answer...

Answer 7

The Timbren kits like the #TTORTUN4L that you referenced do not raise the suspension of the vehicles they install on. They only reduce sag when the vehicle has weight on it from either a trailer tongue or cargo. There will be about 1.5 inches of…

view full answer...

Answer 8

The SumoSprings Solo Custom Helper Springs part #SSR-612-40 for a 2020 Nissan Frontier don't come with spacer nor are their any designed for this as the springs are made for factory suspension. If you wanted to make your own I don't see any…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Timbren Helper Springs for a 2014 Nissan Frontier Desert Runner with Leaf Springs on Top of Axle

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching