Replacement Lid for MaxxFan # MA00-07500K

Question

Question:

Hi, Do you sell spares for the maxx air fan 7500k? Ive got a crack in the external shroud. Thanks

asked by: Jason

0

Expert Reply:

The replacement lid you need for your MaxxFan # MA00-07500K is the part # MA05-30520.

expert reply by: Jameson C

0

Answer 1

There are not specific instructions on how to replace the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke part #MA05-30520 on the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part #MA00-06401K. However, replacement…

view full answer...

Answer 2

Yes we have smoke colored RV roof vent lids. Can you get me the brand and more info on your roof vent? With that I can see what you'd need.

view full answer...

Answer 3

The correct replacement lid for MaxxFan 4751ks is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K for black or part #MA10A40002K for white.

view full answer...

Answer 4

Knowing the actual model number would be best so as to confirm you are ordering the correct part but, if you have the the MA00-04751KSX then we have the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents, #MA39FR.

view full answer...

Answer 5

For your MaxxAir model 8900K, we have the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF and the Replacement Lift Arm for MaxxFan Roof Vents #MA10-20222KS. From your pictures and what you mention…

view full answer...

Answer 6

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 7

We do have a replacement circuit board 10-04751K with the part #MA10A04751KS which fits the 8951k.

view full answer...

Answer 8

Yes, the MaxxAir MaxxFan Plus Roof Vent #MA00-04751KSX that you referenced would easily replace the MaxxFan you currently have installed in your 2015 Montana 36RL as this fits the same size RV roof opening.

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...