Replacement Lid For A MaxxAir MaxxFan 4751KS

Question

Question:

We just had a bad hail storm and the cover for our 4751ks vent fan broke. Do you have some kind of replacement that will work? Thanks

asked by: Wayne M

0

Expert Reply:

The correct replacement lid for MaxxFan 4751ks is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K for black or part # MA10A40002K for white.

expert reply by: Kevin C

0

Answer 1

For a MaxxAir 4751KS you'll want the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - White #MA76JR ( #MA26JR for Smoke and #MA86JR for Black). If your vent doesn't have the EZclip connectors then you'll simply need to screw the…

view full answer...

Answer 2

Knowing the actual model number would be best so as to confirm you are ordering the correct part but, if you have the the MA00-04751KSX then we have the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents, #MA39FR.

view full answer...

Answer 3

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 4

For your MaxxAir model 8900K, we have the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF and the Replacement Lift Arm for MaxxFan Roof Vents #MA10-20222KS. From your pictures and what you mention…

view full answer...

Answer 5

Yes, the MaxxAir MaxxFan Plus Roof Vent #MA00-04751KSX that you referenced would easily replace the MaxxFan you currently have installed in your 2015 Montana 36RL as this fits the same size RV roof opening.

view full answer...

Answer 6

Yes we have smoke colored RV roof vent lids. Can you get me the brand and more info on your roof vent? With that I can see what you'd need.

view full answer...

Answer 7

We do have a replacement circuit board 10-04751K with the part #MA10A04751KS which fits the 8951k.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.

view full answer...

Answer 11

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 12

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Replacement Lid For A MaxxAir MaxxFan 4751KS

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching