Can Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR be Used with 2020 Jeep Wrangler

Question

Question:

Does this product work with a 2020 Jeep Wrangler. Have spare tire on rear door and I have a Van Kams welded aluminum rack

asked by: Dickerson C

1

Helpful Expert Reply:

Yes the Patriot Hitches Adjustable Drop Hitch Receiver Adapter # PH67SR could be used on your 2020 Jeep Wrangler and would work well with your Van Kams rack.

expert reply by: Jameson C

1

Answer 1

Sway control is not something that is legally required for vehicles to tow your trailer, but the specific vehicle manufacturer may recommend sway control when towing a trailer. This is more common on smaller, lighter vehicles that are a bit more…

view full answer...

Answer 2

The Draw-Tite Ball Mounts, item #4283, does not come in a 6 inch rise configuration. At this time we do not have a ball mount with a 6 inch rise available. We do offer two ball mounts with a bit higher rise. The Convert-A-Ball Cushioned Ball Mount…

view full answer...

Answer 3

I do have a solution, but I would not recommend using a hitch extender with the Patriot Hitches Adjustable Drop Hitch Receiver #PH67SR. This receiver won't reduce the capacity of your hitch, but an extender will reduce the capacity by 50%.…

view full answer...

Answer 4

Thanks for reaching out and your purchase of the etrailer Trailer Hitch Receiver #e93ZR for your 2022 Nissan Rogue! To choose the correct ball mount you'll need to figure out the difference between the height of your hitch receiver and your…

view full answer...

Answer 5

The MaxxTow Adjustable Ball Mount, Part #MT70068, has a distance from the center of the hitch pin hole to the upright of 8-1/8 inches. This part includes both a 1/2-inch pin and clip to secure the ball mount, and a 5/8-inch pin and clip to secure the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...