Outer Dimension of Tubing Used to Construct Buyers Products 337RT25848B 48 Inch Receiver
Question:
Will this tubing slide into a Class V 2 1/2inch hitch? Thanks
asked by: Roger H
Expert Reply:
The outside dimension of the tubing that the # 337RT25848B Buyer's Products Black 2 Inch Receiver Tube is constructed of is 2-1/2 inches, so theoretically speaking it would possibly fit in a 2-1/2 inch receiver. However, it will likely be a very tight fit due to manufacturing tolerances and the fact that the
# 337RT25848B really isn't designed to be an adapter, but is rather principally designed as a fabrication part used to construct towing equipment.
In order to get the tube to fit easily into a 2-1/2 inch receiver, you'd likely need to remove the powder coating by lightly sanding. If a more aggressive, heat inducing method like grinding is used to remove the finish, the steel the tube is constructed of could weaken.
Because of the length of the tubing, using it as an adapter/extender would reduce the capacity of the hitch it's used in because of the extra leverage it would exert on both the hitch and it's attachment points to the vehicle. Typically, using an extender this long would reduce the tongue weight capacity of the hitch by half or more, but Buyer's Products hasn't tested it for said purpose they wouldn't hazard a guess on the actual reduction.
Product Page this Question was Asked From
Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 48" Long - 20K
- Hitch Fabrication Parts
- Receiver Tube
- 48 Inch Long
- Painted
- Fits 2 Inch Hitch
- Buyers Products
more information >
Continue Researching
- Shop: Camper Tie-Downs
- Shop: Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
- Shop: Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 48" Long - 20K
- Shop: Tow Ready Combo Bar with 2" Trailer Hitch Receiver - 48" Long - Raw Finish
- Video: Tow Ready Hitch Fabrication Parts - Receiver Tube - 80948 Review
- Search Results: hitch extension
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Shop: TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Shop: Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
- Search Results: hitch extender hitch adapters
- Search Results: hitch extender
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Shop: Trailer Hitch
- Search Results: weight distribution hitch
- Search Results: camper tie~downs
- Shop: TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 36" Long
- Search Results: rhino rack tie down straps
- Search Results: weld on receiver hitch
- Q&A: Creating a 16 foot Hitch Extension For Trailer
- Q&A: Can TORKLIFT Super Truss Be Used With Curt Class V Trailer Hitch On 2014 Ram 3500
- Video: Curt Hitch Fabrication Parts - Shank - C49537 Review
- Video: TorkLift Front Frame-Mounted Camper Tie-Downs Installation - 2020 Ford F-250 Super Duty
- Q&A: 2-1/2" Heavy Duty Trailer Hitch Receiver and Extension For a 2001 Ford F-350
- Q&A: Dimension From End to Center of Hitch Pin Hole on Curt Solid Steel Bar # C49537
- Video: Curt Hitch Fabrication Parts - Receiver Tube - C49480 Review
- Video: Curt Hitch Fabrication Parts - Shank - D30 Review
- Video: Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25848B Review
- Q&A: Can a 48 Inch Long Combo Bar be Used to Make a Hitch Extender
- Q&A: Recommended Hitch Extension For Truck With Large Camper Overhang
- Q&A: Recommended Welding Rod for Curt Solid Steel 2" Hitch Bar D30