T-Style Hook and Keeper Door Holder Longer than 6 Inches

Question

Question:

I would like to know if I. Or if you all have 10-12 inch t- style latches. Needs to hold open rv door. 4 and 6 inches are just to short. Please reply Thank you

asked by: Violet C

0

Expert Reply:

We do offer a 10-inch T-style latch for your RV. It's part # 37210482. This is our longest T-style hook and will keep your door open while loading and unloading. I've linked to a video review of this door holder for you to look at.

expert reply by: Kef G

0

Answer 1

I have a solution for you but the largest size we have in the style you referenced is a 6" T-Style Hook and Keeper Door Holder item #37210525. This one is also stainless steel and comes with mounting hardware. For a 10" long door latch we…

view full answer...

Answer 2

The Fulton Marine Grade Carpeting, part #FCR8012, is only available in the one color. It is a dark gray, almost black color. This part number is 12 inches wide x 144 inches long. I also have the Fulton Marine Grade Carpeting, part #FCR8008, which is…

view full answer...

Answer 3

Thanks for the photo, and the best option for a door retainer that is stronger than a rubber door retainer is the plunger and socket style, which are more heavy duty and will allow your door to stay open while the wind blows. This style has gotten…

view full answer...

Answer 4

Regarding the man door and the awning, is there any way that you can attach the plunger style holder, #DH605, to the support are for the awning that is causing the interference? Otherwise, you could use something like the hook and keeper, #383400. If…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 10

The good news is that 210 degrees isn't the worst temperature for a transmission to get to when towing. Ideally it's under 200 but you haven't done massive damage to your transmission. For your 2011 GMC Yukon XL I recommend the Derale…

view full answer...

Answer 11

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 12

You should not need an extension for the Hollywood Racks Destination E Bike Rack #HLY66ZR to fit on your 2021 Jeep Wrangler Unlimited Sport. We installed this on a 2021 2-door Wrangler which I have included the install video linked near the bottom of…

view full answer...