Will the Curt Trailer Hitch # C13416 Fit a 2021 Toyota RAV4 Hybrid?

Question

Question:

Hello. Will this trailer hitch fit a 2021 Toyota RAV4 hybrid?

asked by: John

0

Expert Reply:

Yes, per Curt, the Curt Trailer Hitch # C13416 is confirmed to fit your 2021 Toyota RAV4 Hybrid. Check out the video linked below for more details on this product.

expert reply by: John R

0

Answer 1

Assuming you have the gas/hybrid and not the RAV4 Prime plug in hybrid, you'll need the Curt Class III hitch, part #C13416. You'll also need a trailer wiring harness like #C56434, a ball mount and hitch pin like #D-28 and #PC3 and a trailer…

view full answer...

Answer 2

The hyper flashing due to LED lights on your trailer is often solved with the 7-way adapter you mentioned the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass - 7-Way RV to 7-Way RV - Vehicle End #20142. The issue is often that LED's pull so…

view full answer...

Answer 3

Yes. The Curt #C13416 has been confirmed as a fit for the 2021 Toyota RAV4. This is a Class III hitch with a 2" receiver that has a concealed cross tube, so you'll have a bit less worry about bottoming out and dragging the hitch when going…

view full answer...

Answer 4

The Curt trailer hitch that fits your 2019 Toyota RAV4 Hybrid, part #C13416, does not require and cutting or drilling to install. You also do not need to disconnect the exhaust hangers although it might make it easier. The only modification that you…

view full answer...

Answer 5

In regards to the Curt Trailer Hitch Receiver part #C13416 which is a fit for a 2021 Toyota RAV4, the hitch pin hole is about 5" behind the rear bumper. The distance to the hitch ball would be dependent on the length of the ball mount. I am…

view full answer...

Answer 6

You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the…

view full answer...

Answer 7

The etrailer Trailer Hitch Receiver #e23ZR and Curt #C13416 you were looking at for your 2019 Toyota RAV4 are very similar in the fact that they both have the same ground clearance of roughly 10", and the same capacities at 600lbs tongue weight…

view full answer...

Answer 8

Yes, the trailer hitch options for a 2021 Toyota RAV4 will fit the Prime models. I recommend the Curt Trailer Hitch Receiver part #C13416 which is a direct bolt-on fit. It is very easy to install and provides the larger 2" receiver tube so…

view full answer...

Answer 9

With the Curt Trailer Hitch Receiver #C13416 installed on your 2019 Toyota RAV4 Hybrid Limited you should be able to activate the hands free liftgate function by kicking to either side of the receiver. I am attaching a photo that shows some locations…

view full answer...

Answer 10

You should not have a problem opening your hatch with your foot when the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", pat #C13416. At etrailer we are experienced in installing this hitch receiver on the 2021 Toyota RAV 4. Both of…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will the Curt Trailer Hitch # C13416 Fit a 2021 Toyota RAV4 Hybrid?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching