To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (1394 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Outside of some slight scuffs from ups everything went well. It was a pain to install the bolts on the passenger size because of Toyotas design, but not a fault of the hitch. Overall with the lift and a transmission jack it took me ~15 minutes. Recommend definitely
The bolts lined up just fine. On my RAV4 Prime, I had to remove a tranport eye plate that was mounted in one of the holes needed for the hitch. You will also need to unhook the rubber exhaust supports so you can lower the exhaust to get the hitch in. This hitch height will be lower than the Toyota model.
Larry
4/5/2024
Used 5 or 6 times, no problems. Paint still looks new.
Great trailer hitch! The hitch fit my 2023 RAV4 Prime perfectly and following the online videos made the installation simple and easy. The receiver sits below the bumper instead of up in the bumper like the OEM hitch, but the OEM requires removing and modifying bodywork for installation.
Arrived when listed, though the box was torn from mishandling. The instructions were spot-on and easy to follow: including the wiring advice.
The hitch looks great, works with trailer and bike rack.
Receiver hitch was packaged well. Box held up during shipping.
Patrick
7/22/2023
The hitch was easy to install. I deliberately got the hitch that didnt require me to cut my rear bumper cover. After having in on for a year, I can say Id rather have the hitch that is higher in the bumper requiring me to cut it. with any significant weight in the rear of the car, the hitch is quite close to the ground around 4.8. This is not a quality issue, nor a problem with etrailer. It the hitch I picked when considering ease of install, price.
PACKAGING/DELIVERY: Like most others, the packaging was damaged during delivery, but the hitch was fine and the attachment hardware was securely fastened to the hitch so all parts where included.
INSTALLATION: The videos helped along with people's posts. The right (passenger) side IS a tight fit. I ordered the 19mm crow foot by Tekton off Amazon and ended up returning it because the it bent and actually rounded one of the corners on two bolts; 80+ foot-pounds of torque is a lot, I never did get my torque wrench to that because it would round the corners before it made the torque. Would be a nice addition if etrailer offered a quality part for that. Installation DEFINITELY goes smoother with two people.
FIT: You do have to work it into position, but once you get it there, it fits nicely, just like the videos. We haven't used it yet, still need to get the right receiver and ball.
Awesome hitch! Easy to install too.
Doug
3/31/2024
The hitch is still going strong! Great product. I definitely recommend it.
The installation went well. Your online videos were very helpful. Super disappointed with the shipping container/ packaging. All the staples had pulled out of the box and someone poorly taped it together. My new trailer hitch has many gouges and scratches. Not trilled !
Jenny N.
5/12/2023
Oh I am sorry to hear that. I will have our Customer Service team reach out to you.
First, reaching the West Coast only took a week, which is not bad for 40 lbs of metal. I had issues with packing as I was worried there might be damage considering the rack was popping out of the box (see image). I contacted etrailer.com, and the response was quick. They told me it was normal, but if anything was missing, to contact them. I took everything out as it looked fine. The mounting was effortless, with four bolts into the frame, and presto! Overall great customer service, and if I need any other hitches, I know I'm sticking to etrailer
I love buying from etrailer because their videos are always incredibly helpful. I save a ton by doing the installation myself, and I have the confidence to do it myself with the support from etrailer. This is my second hitch purchase from etrailer.
Mark
3/2/2024
This is my second time installing this hitch on a Rav4 and 3rd time installing a hitch from etrailer. The install videos are what sets etrailer apart! Easy to install.
Excellent direct fit for my 2023 Toyota Rav 4. In addition I purchased the wiring kit for the rear lights. I pull a 7' utility trailer. The Toyota hitch requires cutting the rear bumper leaving it less structurally sound and unattractive. No cutting required with this unit. The videos provided from etrailer are tremendous. They are so professional. It's like having someone with you every step of the way. I have had several people with Rav's look at my installation vrs the factory accessory and wish they had mine. Until I had done my homework I was prepared to have my Toyota dealer do it. They never even told me they would be cutting my bumper. Additionally the Curt hitch is designed to give me the same 12" ground clearance vrs factory original without any cutting. I love this hitch! Thank you etrailer!
Overall I’ve been happy with the trailer hitch receiver. There is some rusting, but not thing major. I do wish that it ended up a bit higher up off the ground to prevent the cargo carrier I’m using with it from scraping on fairly minor dips, but that’s more of a limitation of the RAV4 being lower to the ground. Would recommend getting a cargo carrier with a rise shank (63153) or adding a high-low adapter (but this probably risks more rattle).
Very easy to install. The video walks you through every step. Also not having to cut the bumper of a two day old 2023 Rav-4 hybrid is a big plus. Would highly recommend this hitch
This premade hitch was a perfect fit and I was able to install it in less than an hour by myself using preexisting holes in the frame of my 2020 Toyota RAV4. I used a pile of bricks to temporarily hold the hitch in place to start the screws but could just as easily used a small floor jack.
My usage is a little off the reservation: as a mount for a large mobile ham radio antenna. I had found the metal in the vehicle body was too thin to support highway wind loads resulting in stress cracking. Using an MFJ receiver hitch antenna mount solved this problem and it is very easy to remove the antenna when the vehicle goes to the shop for maintenance.
Craig C.
10/6/2023
Its still working great after a year no loose bolts and no visible corrosion.
I'm a bit older so had it installed by my RV facility. It took less than an hour and has worked well for my purpose. Great quality and excellent customer service from etrailer.
Good so far. Hitch arrived quickly with a little damage to the box but the hitch is solid with no damage. The finish is a thick gloss black and looks good. Installation was not too bad with two of us to lift into place and bolt it on. Has to lift the back end of the rav4 to install it.
Installed hitch myself in a little over an hour at ground level with the help of a couple paint cans and a think roll of painters tape to hold it in position while starting bolts. Wiring harness took longer to carefully route wiring behind panels and under car to hitch.
Good sale, good company, good product. I would recommend them. Relatively easy installation, torque wrench needed. Prompt delivery.
The hitch has been working great for bike transport for the last year. I haven't done any actual towing with it. Installation took a little trial and error to get it around the mufflers on the Rav4, but overall not bad. Highly recommended!
Installed on 2022 XSE Hybrid in about 45 minutes with two people. As others have stated, two notable things were box damaged in shipping and passenger side being much tighter. The rack was not damaged despite the torn box. A rubber mallet came in handy to make fine adjustments at the end of installation, a thin 3/4" wrench, and a petite pair of hands for the passenger side specifically. We were able to slide under the car and do everything without jacking it up. The kick sensor does seem to be disabled now regardless of what angle I try. It looks really good though and feels solid, good purchase overall and super quick shipping from etrailer.
I would have provided a 5 star rating, but the delivery package was very poor. The frame attachment plates had ripped through the cardboard and I had to apply touch up paint. The hitch itself is excellent. I have a 2024 RAV4 and was able to install myself w/o lowering the muffler and with the use of a floor jack. The automatic sensor for the lift gate continues to function as well. Clearance from bottom of hitch to ground is 10 1/2”, better than expected. This is my second hitch purchased from Etrailer.
Solid and with right tools easy to install Works great with Bike Rack
This hitch was installed on a 2021 Toyota Rav4. It is solidly constructed. Installation was simple and the etrailer videos were very helpful in the installation process. We did need two people as the hitch is heavy and cumbersome but the install was done without jacking up the car. The passenger side was a very tight working space so we inserted the bolts and mounted the hitch on drivers side first. Then we placed the car jack under the hitch to lift into place for bolting the passenger side. The jack was needed for a bit more lifting power than we could muster by hand to line up the bolt holes. The hitch fit perfectly onto the car. The entire process took about an hour.
Paul P.
8/17/2022
The hitch is great. Sturdy and solidly built. It has held up well and survived a rear end collision while the bike rack was installed. The rack took the brunt of the forces but the hitch was not damaged. I still highly recommend the hitch
Rav4 fit like a glove.Backed into and up asmall car ramp. you will need another hand and be sure to watch the videos.Also check and clean the threads befor install.This is my third hitch from them.
Another awesome hitch receiver, these are just great! This is my 3rd purchase from etrailer and they fit perfectly every time. They are very solid and excellent quality and make life very easy if you need to add one. Price is best on the market, can't go wrong, just a great company and awesome products!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gene M.
8/26/2023
No issues thus far. I went in a few weeks back at service time and retorqued the bolts. All were exactly as I left them. I will say that it does hang a little low and I have hit it on extreme offs once or twice, but nothing outside of a scratch or two.