What Does It Mean By 34 Frame On Curt Gooseneck Hitch for 1999 Chevy K2500

Question

Question:

will it fit. what does it mean by 34inch frame?

asked by: Ed C

0

Expert Reply:

The Curt Double Lock, Flip and Store Underbed Gooseneck Hitch part # C60713 is a fit for a 1999 Chevrolet K2500 except for cab and chassis models which will have a 34" frame (measuring from the outside of one frame rail to the outside of the other) but if you have a regular truck bed you won't have to worry about this.

expert reply by: Conner L

0

Answer 1

The correct Reese Elite fifth wheel rail kit for your 2010 Ford F-350 is actually the part #RP30073. Then for an adapter to convert it to a gooseneck ball you'd want the part #RP30845 and you'd be set.

view full answer...

Answer 2

We definitely have Gooseneck options for a 2017 Ford F-350 Cab and Chassis. That being said, I spoke to B&W and they currently do not have a custom fit model available. They did, however, say the #BWGNRC800 would work, but custom rails would…

view full answer...

Answer 3

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

view full answer...

Answer 4

We don't have a custom rail kit that fit your C4500, but at this time we do not have anything that would work aside from recommending you use a universal kit part #RP30035 to come up with a way to install the Patriot. I looked up pictures of…

view full answer...

Answer 5

There are not custom brackets that go back that far on your K-Series truck. The Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #RP30035 will work well for your truck and are rated for more towing capacity than…

view full answer...

Answer 6

I attached a picture that I took from the install instructions for the Draw Tite gooseneck hitch part #8339-4440 that you referenced. There's some cutting and drilling required to install the hitch but you would not need to lift the bed up to…

view full answer...

Answer 7

The cab style does not matter, the B and W Turnover Ball part #BWGNRK1000 that you referenced will fit your 1997 Chevy 3500 regardless if you have a regular or crew cab.

view full answer...

Answer 8

For your 1996 Chevy C 3500 long bed pickup the confirmed gooseneck hitch fits are shown on the linked page. These include kits that DO work with the Crew cab configuration so long as the frame is not the 34-inch version, such as Curt #C61652-631 and…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

What Does It Mean By 34 Frame On Curt Gooseneck Hitch for 1999 Chevy K2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching