Mounting Aftermarket Crossbars to 2018 Subaru Forester Factory Side Rails

Question

Question:

I have a 2019 Subaru Forester with standard side rails and Subaru Aerobar crossbars. I have been carrying a 30inch wide kayak on foam blocks that clip to the crossbars. Works wonderfully. Wife is now interested, so I now need to carry two kayaks. I prefer the lay-down profile as opposed to J-racks. This 68inch crossbar would accommodate two 30inch wide kayaks laying flat and leave 4inch sticking out for the tie-downs. What I need to find out is if there is an adapter to mount these 68inch bars to my Subaru side rails.

asked by: John C

0

Expert Reply:

The first thing you need to check is that the crossbars you use don't go past your side mirrors. Any longer can be a safety problem, or even illegal in some areas.

With that said, to adapt the Yakima HD Crossbars- 68" # Y01158 for your Subaru side rails, you need the 4pcs of the HD bar adapter # Y03541 and 4pcs of the Yakima TimberLine Towers # Y33TR. I attached a video showing how we installed the TimberLine Towers onto the rails of a 2018 Forester. To see how the HD bar adapters work, there's another video of them on a 2018 Ford Expedition.

These crossbars pair well with the Yakima 30-inch Crossbar Pads for Square Crossbars # Y07415 for your second 30" kayak as well as some extra straps # E98876-2.

With two kayaks lying flat on your Forester, you might need some extra reach to tie them down. I have a video using the Rightline Gear Moki Door Step # RL100660 on a Subaru Forester that you or your wife might be interested in. I use the door step A LOT here at etrailer when working with roof racks and their accessories.

expert reply by: Evangeline M

0

Answer 1

If I understand correctly you want to know the distance side to side from one set of clamps to the other on the Yakima SkyBox 18 #Y07336 as well as the 16, #Y95AV. On both of these boxes that distance is 21 inches. This is from the outside of one…

view full answer...

Answer 2

At this time (August 2019) the only roof rack solution we offer for your 2019 Toyota RAV4 with flush rails is the SeaSucker Monkey Bars part #298-SX6000B that you referenced which is perfectly compatible with the Yakima Skybox 18 part #Y07336. I…

view full answer...

Answer 3

Sounds like you want a roof-mounted bike rack for your 2018 Subaru Forester. A good one is the Yakima HighRoad Roof Bike Rack #Y02114. This is a wheel mounted bike rack that clamps onto your front wheel to secure it. It has a strap that goes around…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

The best trailer hitch receiver for carrying bikes that fits your 2021 Toyota RAV4 Limited Hybrid is the EcoHitch Hidden Trailer Hitch Receiver #EH97FR. The reason for that is because it has the best ground and bumper clearance for a bike rack…

view full answer...

Answer 7

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The Replacement Wind Deflector Fairing #RR68TB is 32" long and 4-1/4" wide. It is designed to replace the air deflector on your Rhino- Rack roof mounted steel cargo basket.

view full answer...