Yakima HD Crossbars Installation - 2018 Ford Expedition Video

The weight capacity of the Yakima CoreBar Crossbars like part #Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part #Y01157 which have a 500 lb…

The Yakima HD Crossbar Set, part #Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part #YA34FR, states that its weight capacity is 500 lbs because these bars are…

I would be happy to help you. To add a roof rack to your 2018 Ford Expedition's factory raised rails, you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2…

For your 2018 Ford Expedition with Yakima HD 60" Bars, I recommend looking into the Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 84" Long x 54" Wide #Y05048-39. This is a very large flat cargo rack which will work well on…

I reached out to the manufacturer regarding the end caps for your Retrax cover and unfortunately per the manufacturer the end caps are not available by them selves they are only available if you buy the entire replacement side rail such as the…

Since your roof rack on your 2007 FJ Cruiser is rather large compared to others, I recommend getting the Yakima HD Crossbars #Y01157 with these feet #Y33TR. They wrap around your factory roof rails and will ensure a tight fit. You'll need these…

To install the Rhino-Rack Vortex roof rack system on your 2018 Ford F-150 (see parts list below) you'll want the rear crossbar to be 520 mm back from the middle of your doors for a SuperCrew cab (420 mm for a SuperCab) and then the center of the…

The best place to find the roof weight capacity for a 2022 Ford F-350 according to Ford is in your owner's manual. That said, I wasn't able to locate this information in there. Therefore, I recommend reaching out to the dealer. If you're…

The 63 inch Rhino Rack RTC Style Roof Rack Tracks, #RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went…

Yes, the Yakima HighRoad Roof Bike Rack - Wheel Mount - Clamp On #Y02114 is compatible with the Rhino-Rack Vortex Crossbars. You can either use the included clamps, or you can use Yakima T-Slot Adapter #Y02122 to fit the HighRoad into the Rhino-Rack…

I looked up the tonneau cover you have on your 2019 Toyota Tundra with a 5-1/2 foo bed and the deck rail system and it's going to prevent you from being able to install a ladder rack to carry kayaks since it covers up the tops of the bed rails.…

For a roof rack that has been confirmed to allow you to open the moonroof with the rack installed check out the Yakima Roof Rack consisting of: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 #Y00425 BaseLine Towers for Yakima…