Correct Curt 2" Trailer Hitch for a 2002 GMC Sierra 2500HD

Question

Question:

Will this fit my truck? 2002 2500hd

asked by: Michael D

0

Expert Reply:

If you are looking for a trailer hitch for a 2002 GMC Sierra 2500HD then I recommend the Curt Trailer Hitch Receiver part # C13108 because it's a custom bolt on option. The Curt Trailer Hitch Receiver part # C13902 that you asked about may work but it's a semi-custom fit so it would likely require modifications.

expert reply by: Conner L

0

Answer 1

As long as you don't have the 10" deep drop bumper on your 2004 Chevy Silverado 2500HD the trailer hitch you need to replace your OEM is the Curt Trailer Hitch Receiver #13210. The design looks a little different but it still has a hidden…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver #13932 is a confirmed fit for the 2007 GMC Sierra Classic 1500 with aftermarket Roll Pan Bumper. This will not fit your 2007 GMC Sierra Classic 2500. For a Class III hitch like this one that is confirmed to fir a 2007…

view full answer...

Answer 3

If your 2002 Chevy Silverado 3500 features the standard factory rear bumper (and not a 10 inch deep drop bumper) then the correct Curt hitch is the Class V #C15312 that you referenced. I have attached an image that shows the difference between a…

view full answer...

Answer 4

I recommend the Curt Trailer Hitch Receiver #C15302 for your 2003 Chevrolet Silverado 2500HD with the 6' bed since the B&W #BWHDRH25189 will only fit the 8' long bed. The Curt receiver is rated for a tongue weight of 2,400lbs with a…

view full answer...

Answer 5

The correct Curt Class V Trailer Hitch Receiver for a 2006 Chevrolet Silverado 2500 with 6-1/2' bed is part #C15302, not part #C15312 which is for models with an 8' bed.

view full answer...

Answer 6

There are a few different options to choose from depending on the style of 2003 GMC Sierra 1500 HD that you have. If you have a 10 inch Deep Drop Bumper I recommend the Curt #13339. If you have the aftermarket Roll Pan Bumper I recommend the Curt…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Correct Curt 2" Trailer Hitch for a 2002 GMC Sierra 2500HD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching