Can Happijack Qwik Load Turnbuckles Work with Torklift Frame Tie Downs

Question

Question:

Ive been using a Happijac system to secure my Lance truck camper. I would like to change this out for a Torklift frame mount system. Are my Happijac Qwik-Load turnbuckles compatible with the Torklift system? Thanks,

asked by: Josh

0

Expert Reply:

Yes, the Happijac Qwik-Load turnbuckles are very similar to the Torklift Turnbuckles like the # TLS9529-2-LK so they would work fine.

expert reply by: Jameson C

0

Answer 1

According to Torklift they recommend that the tension on a turnbuckle, like their TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs #TLS9050A should be at 300-ft/lbs to properly secure the camper. This is going to be standard…

view full answer...

Answer 2

To maintain the warranty of the Torklift Custom Frame-Mounted Camper Tie-Downs, #TLN2409 and #TLR3500, for your 2010 Nissan Frontier, you will want 4 spring loaded turnbuckles like the Torklift SpringLoad XL Turnbuckles, #TLS9050A or the FastGun…

view full answer...

Answer 3

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 4

Yes, the HappiJac Truck-Mounted Camper Tie-Downs #LC182905-182971 is confirmed to fit the 2007 Chevrolet Silverado with the new body, excluding the extended cab. Please note the attached review video.

view full answer...

Answer 5

Did you try the longer rear hooks in the front position of the #LC182895? If those were long enough they are available separately with #LC182896.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 #TLS9529-2-LK comes with the keyed alike locks, so one key will work for all 4 locks. You will get 4 keys, but you can use 3 of them as spare…

view full answer...

Answer 8

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

view full answer...

Answer 9

The correct Replacement Key for FIC Locks key number 336 is #GL48FR. If that is for the front door, you'll need to find the key code for the rear. The key code is sometimes on a sticker that is on the handle, or in some cases can be on a sticker…

view full answer...

Answer 10

If your Fan-Tastic Roof Vent is leaking it's going to be a sealant issue between the vent assembly and the roof of the trailer. So you'd need to have the base of the vent resealed to the roof with sealant like the part #34427034145-1 and that…

view full answer...

Answer 11

For your 2010 Dodge Ram dually, short bed, with factory hitch and without full length running boards the correct tie downs from Torklift are the part #TLD2120 and #TLD3109. Since you have a dually you do also need the relocation kit part #TLA7004…

view full answer...

Answer 12

Your 2019 Ram 3500 4X4 diesel with the 8' bed and factory running boards under the cab. You have two options, depending on your vehicle's options. If you have the 8' bed with a fixed board under your cab with factory installed hitch, you…

view full answer...

Can Happijack Qwik Load Turnbuckles Work with Torklift Frame Tie Downs

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching