Could Two Thule Hullavators Fit 2018 Subaru Crosstrek

Question

Question:

Can two of these fit on a 2018 crosatrek

asked by: Miriam

0

Expert Reply:

The Thule Hullavator part # TH898 takes up a max of 28-1/2 inches of bar space so if you installed a roof rack that has crossbars that are around 60 inches you could fit two of them. So then for a roof rack your best option would be the Malone Rack part # MPG216 which fits the raised rails of your 2018 Subaru Crosstrek and has bars that are 58 inches in overall length.

expert reply by: Jameson C

0

Answer 1

Yes two of the Thule Hullavators part #TH898 will fit on the factory crossbars of your 2019 Honda CR-V if the bars extended past the feet of the rack. Otherwise you'd have to go with an aftermarket roof rack like the Rhino Rack part numbers…

view full answer...

Answer 2

The Thule Hullavator Pro - Lift Assist Kayak Carrier #TH898 requires about 28-1/2" of crossbar space and also requires the crossbars to overhang at least 4" on each side. Aside from that, the Hullavator weighs 40lbs each. It is…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...