Can I Safely Install the EcoHitch on a 2013 Toyota Prius c

Question

Question:

I have called several local trailer hitch shops inquiring about getting a 2inch hitch attached to my 2013 Toyota Prius C. They have all said that its not possible or that there are safety concerns. Additionally they refused to install a 2inch hitch even if I purchased it myself. I do not plan on towing with this hitch but rather just installing a bike rack. Id prefer to get this professionally installed but it seems that all the professionals in my area have issue with a 2inch hitch on a Toyota Prius C. Are their concerns valid?

asked by: Jackson W

0

Expert Reply:

We've had several different years of models of the Prius where we've installed hitches like the EcoHitch # 306-X7194 and there are no safety concerns, especially when being used to a bike rack. For these reasons, I'm not really sure their concerns are valid and likely stem from the fact that this isn't a vehicle that would typically have a hitch installed on it.

With that said, the EcoHitch is what I would recommend since it provides you with a 2" hitch receiver and provides you with the largest selection and best capacity for carrying a bike rack. You might want to consider just installing this hitch yourself, so I've linked the installation video that we did of this hitch on a 2013 Toyota Prius c that I recommend checking out. This is a no-drill instruction, so it's relatively simple to complete.

If you don't already have the bike rack picked out and are looking for some recommendations, just let me know and I'm happy to help you find one that would work well for you.

expert reply by: Erik B

0

Answer 1

The Thule Roadway 2 Bike Rack #TH9058 weighs in at 28 lbs. If your bikes have smaller frames then you would likely need an adapter bar like the Thule #TH982XT otherwise your bikes will likely sit at a weird angle which not only makes it awkward to…

view full answer...

Answer 2

That's a good question, and between the Curt Trailer Hitch Receiver #C11484 and the Draw-Tite Trailer Hitch Receiver #24971 that fit your 2012 Toyota Prius C, the best option is definitely the Draw-Tite #24971. The reason the Draw-Tite is the…

view full answer...

Answer 3

I checked the install instructions of the EcoHitch part #306-X7194 that you mentioned and the size of wrench you'd need for the 3/8 inch bolts is 9/16 inch.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...