USA Made Trailer Wheel that is 14 inch with 5 Lug Bolt Pattern

Question

Question:

Hello, Interested in some wheels, Can you tell me where Part Number 460545MBPVD is made? Than you.

asked by: Tim H

0

Expert Reply:

The wheel part # 460545MBPVD that you referenced is made in China but for a USA made wheel that's similar the part # AM20353 is same size.

expert reply by: Jameson C

0

Answer 1

Thank you for the photo with all of your tire info on it. For your spare, I don't have any black wheels that already have a tire mounted. If you'd like to keep with your black wheel theme then I recommend the same tire as part #AM10235 with…

view full answer...

Answer 2

A given tire size is usually suited to a range of wheel widths. For example, a 205/75-15 tire like what's used on the #AM32238B you referenced can comfortably fit on a 15 inch diameter wheel ranging from 5 inches to 6-1/2 inches wide. The wheel…

view full answer...

Answer 3

The spare tire can be mounted near the wheel and axle to the frame, but you will want more than 5 inches of ground clearance. I recommend the Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson #DL22145 based on your photo. Every extra inch…

view full answer...

Answer 4

The Extra Offset Trailer Spare Tire Carrier by Dutton-Lainson #DL22145 will work great on your boat trailer. Due to this is carriers very universal design it will easily fit under the hull of the boat. Worst case scenario you'll have to try a few…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...