Which Brophy Camper Tie Downs Fit 2017 Ford F-350

Question

Question:

When the Brophy Tie Down is setting on top of the box sill how far out does it extend? My box is 6+ inches wide at the front box. I ask because I have tried the bolt on Brophys and do not extend far enough away from the truck box body. Thanks

asked by: Jay M

0

Expert Reply:

Unlike most of the other Brophy camper tie downs the # HSWB have been test fit on your 2017 Ford F-350 so we know they will fit well without any interference or measuring required to verify fit.

expert reply by: Jameson C

0

Answer 1

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 2

Brophy Camper Tie-Downs #HSWB do not have a weight rating since they do not support the camper's weight. The truck bed and frame handle that actual camper load and the tie downs provide stability to prevent the camper from shifting in the bed.

view full answer...

Answer 3

Great question! Yes, the Brophy Clamp On Camper Tie-Downs Item #HSWB and the Brophy Basic Turnbuckles Item #TDHP are compatible with your 2020 Ford F-250.

view full answer...

Answer 4

I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over…

view full answer...

Answer 5

We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part #HSSF. There won't be any issues with these tie downs and an aluminum bed so…

view full answer...

Answer 6

For a 2017 Ford F-350 Super Duty DRW, with 8' bed and without board or step underneath truck bed. You have the very cost effective option of the Brophy Clamp On Camper Tie-Downs, #HSWB which are powder coated steel brackets that securely clamp…

view full answer...

Answer 7

Yes, the Brophy Clamp On Camper Tie-Downs Item #HSWB and the Brophy Basic Turnbuckles Item #TDHP are not only safe for use on your 2020 Ford F-250, they are a confirmed fit.

view full answer...

Answer 8

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 you were looking at are a confirmed for your 2019 Ford F-250 4WD with the 6.2L V8 and will do exactly what you are wanting. The #SSA22 will clamp down the upper overload spring…

view full answer...

Answer 9

Brophy has a stake pocket mounted tie down setup that fits your 2018 Ford F-250 short bed with the part #HSWB but the #HSSF you referenced is not listed as a fit. Stake pocket tie downs are more universal in the trucks they fit, are a simpler design,…

view full answer...

Answer 10

The SuperSprings #SSA22 would be a smart choice to raise your 2012 Ford F-250 when pulling your fifth wheel. They are designed to prevent the sagging you are experiencing and should put you pretty close to level. If you take a look at the attached…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...