To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Minimize sway and driver fatigue by improving the stability and driveability of your truck. Solid, 7/8" chromoly bar mounts to the rear axle and to the frame to balance weight transfer and reduce body roll. Includes mounting hardware.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Hellwig rear anti-sway bar for the Ram trucks. Now, this is a custom fit part. It is designed to fit the 2021 and newer Ram 1500 trucks. And on a custom fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show if this will work for your application. Now, this anti-sway bar will minimize side-to-side movement to improve overall stability of your vehicle.
It'll let you execute turns and quick maneuvers with confidence, and allows for a nice level ride, even on irregular surfaces. Helps reduce driver fatigue 'cause it'll minimize the effort that's required to keep your vehicle in line. I did wanna zoom in and show you one of the nice features on this. They offer polyurethane bushings instead of the standard rubber variety, gives you a lot longer lasting system. Basically, the polyurethane is durable, it's resistant to damage that can be caused by oil, gas, and ozone.
And, of course, less wear on your system will mean less give in the system and better support. Now, normally when the polyurethane bushings are used on the sway bar, the grease that is used on installation will dry out over time and the bushings will start to shrink. So what Hellwig try to do to eliminate a lot of that is the finish on the sway bar itself, if you look, it's a silver vein hammer tone finish, has small divots in the finish that helps keep the grease in the bushings and keep the polyurethane bushings greased to eliminate any noise. Now, the bar itself is constructed with a thick 4140 chromoly steel for superior strength. The diameter on this bar is 7/8 of an inch.
This is designed to fit your vehicle and work in conjunction with its suspension system. Basically, this will attach to your rear axle and to the chassis, and it uses the weight of your axle to brace the frame as it shifts and turns. It even avoids interference with most of your popular aftermarket add-ons and accessories. Does include everything laid out here on the table. The anti-sway bar, all the zinc-plated mounting hardware.
They even give you the bushing lubricant to install on the bushings when you install it, and it even comes with a nice set of easy-to-follow instructions. These parts are made in the USA. But that's gonna do it for the review on the Hellwig rear anti-sway bar for the Ram trucks.
Average Customer Rating: 4.8 out of 5 stars (31 Customer Reviews)
Minimize sway and driver fatigue by improving the stability and driveability of your truck. Solid, 7/8" chromoly bar mounts to the rear axle and to the frame to balance weight transfer and reduce body roll. Includes mounting hardware.Rear Sway bar by Helwig: Great, HOWEVER the flange is too rounded on the brackets provided and you cannot get a washer to fit when tightening-also cannot get a socket on to tighten, thus you cannot get a torque wrench on. Front Sway bar by Roadmaster: Great. BUT the provided new bushing that fits in the factory bracket is too thick and needs to be trimmed to fit right. BOTH of these issues SHOULD NOT have to be tolerated by a buyer of what is supposed to be an expensive quality product!!! The staff is superb but they asked me for a PRODUCT review and both brands are not impressive on the hardware.
Really takes that rock-n-roll motion to a minimum, especially when driving out a driveway. Much beefier than the stock E450 sway bar - very pleased with this product.
Really takes that rock-n-roll motion to a minimum, especially when driving out a driveway. Much beefier than the stock E450 sway bar - very pleased with this product.
Sway bars are considerably larger than factory. They were easy to install and helped to control side to side sway. These bars were installed along with a rear sway bar. I would recommend these sway bars
Great experience. The orginal sway bar was disconntinued however Tiffani stayed on top of my order at all times with a direct replacement for my truck.
Thank you,
Installed this sway bar along with a front sway bar. This bar is quite larger than the factory one and helped control side to side sway. I would recommend this sway bar cause it make driving our RV so much more enjoyable.
Thank You etrailer for your prompt shipping and Expert advice and videos!!
Excellent website and easy ordering! The parts were delivered in just a couple of days; really fast process! Thanks for everything and if I need anything else, Etrailer will be the first place I look:)
We’re in total awe that delivery occurred today. An installer has it and it will go on our truck tomorrow.
Good product no torque values on bolts in direction!
Massive improvement over the stock sway bars!
Massive improvement over the stock sway bars!
Easy installation and noticably better handling. Hope it will help when I have the drop in camper in the bed. (Already had rear Hellwig bar)
As usual, etrailer was so helpful and knew exactly what part we needed for our rig. They were sent out the day they were ordered and we had them installed and are 100% pleased with the product. Our motorhome definitely feels more stable and tight with these stabilizers on them.
Great product that works to perfection on my 2020 Ford Expedition. I wanted less sway when on a less than great highway. And that’s what we have achieved.
We ordered the hellwig front and rear stabilizers and had them installed and are 100% pleased with the stability of the rig. I did not even feel a semi passing me after we picked it up from the shop to take it back to the storage unit unlike before.
Excellent , easy to install
Perfect fit and felt a huge difference on the first drive. Install was straight forward with no issues. Highly recommend for all F150 owners!
Very good boxing
Very knowledgeable people
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.