Does Happijac Camper Tie Downs LC182906-182971 Come with Front and Rear Tie Downs

Question

Question:

will this kit come with all 4 corner or is it just front or just read. In the description it says both but from the look of the kit it looks very minimal. Thanks

asked by: Will L

0

Expert Reply:

The part # LC182906-182971 from Happijac is a set of front and rear tie downs so with this part number you'd have tie downs covered for all 4 corners of the truck.

expert reply by: Jameson C

0

Answer 1

I checked with my contact at Lippert and he tells me that the #LC149557 is different from a standard phone cord since it is designed to work with logic boards that are specific to HappiJac components.

view full answer...

Answer 2

According to the instructions manual for the Replacement Remote Control for HappiJac Electric Camper Jack Systems #LC723915, the remote uses AA batteries.

view full answer...

Answer 3

I spoke with my contact at Brophy and he said that its more about the location of the weight of the camper instead of just overall weight. He also stated that most likely the Camper Tie Down #TDSF would not be the component that would break, but the…

view full answer...

Answer 4

For your 2001 GMC Sierra 1500 with a 6.5' bed and factory hitch we have a few options. You could use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLC2205 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear #TLC3205 as long as…

view full answer...

Answer 5

You do not need to remove the bed of your truck to install the HappiJac part #LC182906-182971 that you referenced. I found a copy of the install instructions for this part number (see attached pictures) and there's no mention of the bed needing…

view full answer...

Answer 6

It will not, but we have one that will. For your 2004 GMC Sierra 2500, you'll need the Happijac #LC182906-182971 which includes both front and rear brackets, as well as the needed stabilizer bar. I've linked you to a product description video…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 10

Installing the Union Tee #AL21838 with your #AL57575 will tie the pressure of the two air bags together. So yes, a shift in a very heavy load like a truck camper will potentially result in air being forced from one into the other. The reason I say…

view full answer...

Answer 11

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 12

Sometimes just use of new spring bars can update a weight distribution hitch to match the tongue weight (TW) of a new trailer, but in the case of your Equal-I-zer system, part #EQ37140ET, the highest-rated bars are the 1400-lb set #EQ90-01-1499 that…

view full answer...

Does Happijac Camper Tie Downs LC182906-182971 Come with Front and Rear Tie Downs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching