Handle for Reese M5 Fifth Wheel Hitch that Fits Under Tonneau Cover

Question

Question:

Can the hitch be ordered with the handel compatible with a bed cover? That would be better than having two handles of which one would never be used.

asked by: Fred C

0

Expert Reply:

I wish there was a way to order the Reese M5 fifth wheel hitch part # RP30922 with the low profile handle as the included handle but Reese doesn't offer that to us so our best solution is to offer the low profile handle # RP58553 with the hitch as well.

expert reply by: Jameson C

0

Answer 1

The Reese M5 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package, #RP30895 has three hitch height settings of 14", 16", or 18", the top of the handle will set 4-1/4" above head of the hitch. However, if this causes…

view full answer...

Answer 2

If you wanted the Reese M5 5th Wheel Trailer Hitch #RP30890 to fit under your tonneau cover you'd need to replace the handle of the hitch that points up with the Replacement Low Profile Handle for Reese M5 5th Wheel Trailer Hitch #RP58553. This…

view full answer...

Answer 3

The jaw system on the Demco HiJacker 5th wheel trailer hitch #DM6076P-21K is very secure and one of the better designs available. The single latch jaw surrounds the king pin well and it also has a slide bar for added security. The hitch isn't…

view full answer...

Answer 4

Both of the hitches you asked about have some great features. They both have dual jaws for better king-pin contact, and both have the same towing and vertical load limit capacity. There are a few differences between the hitches. The hitch height of…

view full answer...

Answer 5

The Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part 8550020 is the same as the Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part #DM6076P-21K but it also comes with the Universal Above-Bed Base Rails for…

view full answer...

Answer 6

We have a fifth wheel rail kit that does fit your 2019 Chevy Silverado 1500 6-1/2 foot bed but the Husky you mentioned does not. Instead you'd want the B and W kit part #BWRVK2504 which is a confirmed fit for your truck. Custom fit rail kits like…

view full answer...

Answer 7

We do indeed have a replacement handle for your 20k Reese M5 5th wheel hitch: - Replacement Low Profile Handle for Reese M5 5th Wheel Trailer Hitches #RP58553

view full answer...

Answer 8

In regards to fifth-wheel hitches, there are a number of jaw types. A slide bar jaw is found on the less expensive hitches, such as the Pro Series #PS30129. This type of jaw is a secure one for your trailer but you will notice some king pin noise and…

view full answer...

Answer 9

The M5 is not known for chucking but I did speak to my contact at Reese and he had a few things to try/check. His response is below as well as the pages from the manual for the M5 #RP30928 that he attached as well: This hitch is not known for…

view full answer...

Answer 10

If you wanted to use the Reese M5 5th Wheel Trailer Hitch part #RP30890 with a tonneau cover on your 2019 Chevrolet Silverado 3500 then you would need to replace the handle with the Replacement Low Profile Handle for Reese M5 5th Wheel Trailer Hitch…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Handle for Reese M5 Fifth Wheel Hitch that Fits Under Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching