Replacement Handle For 20k Reese M5 5th Wheel Hitch

Question

Question:

I have a reese m5 20000 lb 5th wheel hitch. And the handle broke and. We’d to replace.

asked by: Alice H

0

Expert Reply:

We do indeed have a replacement handle for your 20k Reese M5 5th wheel hitch:

- Replacement Low Profile Handle for Reese M5 5th Wheel Trailer Hitches # RP58553

expert reply by: Kyle S

0

Answer 1

We definitely have an option to get a tonneau cover working with the UWS UWS Truck Bed Toolbox #UWS00030 once installed on your 2022 Ford F-350 long bed. With that said, the Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A61409 is specifically…

view full answer...

Answer 2

I have a solution for you but the Weather Guard Truck Tool Box #WG46ZV that you referenced is not a low profile box. It sits on top of the truck bed rails so it would not allow a tonneau cover to fit over it. It's also a wider box at 27-1/2…

view full answer...

Answer 3

We don't have just the grip you are looking for your Reese M5 but we do have a replacement low profile handle for it with part #RP58553.

view full answer...

Answer 4

The handles of the tool box #UWS07647 would be too low to access with the Access Toolbox Edition Tonneau cover part #A61409 installed. You'd need a box with higher handles like the #UWS00373 which also fits your truck.

view full answer...

Answer 5

The clearance between the bottom of a 5th wheel overhang and the truck bed is going to depend on several factors including the ride height of the truck, the height setting on the pin box on the trailer and the height setting on the 5th wheel hitch.…

view full answer...

Answer 6

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 7

The jaw system on the Demco HiJacker 5th wheel trailer hitch #DM6076P-21K is very secure and one of the better designs available. The single latch jaw surrounds the king pin well and it also has a slide bar for added security. The hitch isn't…

view full answer...

Answer 8

If you wanted to use the Reese M5 5th Wheel Trailer Hitch part #RP30890 with a tonneau cover on your 2019 Chevrolet Silverado 3500 then you would need to replace the handle with the Replacement Low Profile Handle for Reese M5 5th Wheel Trailer Hitch…

view full answer...

Answer 9

We have a fifth wheel rail kit that does fit your 2019 Chevy Silverado 1500 6-1/2 foot bed but the Husky you mentioned does not. Instead you'd want the B and W kit part #BWRVK2504 which is a confirmed fit for your truck. Custom fit rail kits like…

view full answer...

Answer 10

The M5 is not known for chucking but I did speak to my contact at Reese and he had a few things to try/check. His response is below as well as the pages from the manual for the M5 #RP30928 that he attached as well: This hitch is not known for…

view full answer...

Answer 11

In regards to fifth-wheel hitches, there are a number of jaw types. A slide bar jaw is found on the less expensive hitches, such as the Pro Series #PS30129. This type of jaw is a secure one for your trailer but you will notice some king pin noise and…

view full answer...

Answer 12

If you wanted the Reese M5 5th Wheel Trailer Hitch #RP30890 to fit under your tonneau cover you'd need to replace the handle of the hitch that points up with the Replacement Low Profile Handle for Reese M5 5th Wheel Trailer Hitch #RP58553. This…

view full answer...

Replacement Handle For 20k Reese M5 5th Wheel Hitch

Product Page this Question was Asked From

Continue Researching