2020 Jayco Eagle HT 30.5 MBOK 5th Wheel Slide Topper Recommendations in Black

Question

Question:

I would like to install slide toppers on my 2020 Jayco Eagle 5th Wheel. I would like to install black, beige would be the appropriate color match. Please give me a recommendation for the best option. My slide outs are the following sizes: Slide out #1 - 112.5inch Slide out #2 - 127.5 Slide out #3 - 59 Slide out #4 - 86.5 Thank you,

asked by: Jerime D

0

Expert Reply:

Slide out 2 would need the part # LCV000184673, slide out one would need # LCV000251461, slide out 3 would need # LCV000168104 and slide out 4 would need # LCV000168106 and you'd be set. These are all black as this is only color option we offer aside from white.

expert reply by: Jameson C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 5

Having the puck system is a great feature. If you ever plan on loading the bed with mulch, sand or rock you'll quickly find that having rails permanently bolted to the bed floor is a real pain. Not only that, but the pucks look a lot better.…

view full answer...

Answer 6

The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches item #BW83FR and item #BW73FR are identical kits that both fit the 2023 Ford F-350 with either the 6-3/4' or 8' bed lengths. It looks like item #BW83FR was…

view full answer...

Answer 7

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the pin weight.…

view full answer...

Answer 8

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

view full answer...

Answer 9

You can use that upper hole on your hanger to install the #MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to install…

view full answer...

Answer 10

Hey Clint, you are going to be installing the rail kit on the truck as well, correct? The Demco Recon 5th Wheel Trailer Hitch #DM47YV by itself should take only about 30 mins to assemble and install. The Installation Rail Kit #DM8551000 will also…

view full answer...

Answer 11

Hey Jim, congrats on the new truck and fifth wheel - looks great. Our rule of thumb is that you want a minimum of 6" of clearance between the top of the bed rails and the bottom of the trailer loft. You should be just fine to use the bottom hole…

view full answer...

Answer 12

Quite accurate; the margin of error is 3 percent for the etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity #e99044. I don't see varying levels of liquid in the photos, but do see a customer photo with the scale…

view full answer...