Does etrailer Cargo carrier e98874 Include Hitch Lock

Question

Question:

Does this come with the hitch pin and key

asked by: Mark F

0

Expert Reply:

The etrailer cargo carrier part # e98874 comes with an anti-rattle hitch pin but does not have a lock that comes with it. For that you'd also want the part # e99047 and you'd be set.

expert reply by: Jameson C

0

Answer 1

This sometimes happens and the best solution is to get the locking anti rattle bolt #e99047. It is a lot longer and can be locked so it's an upgrade for sure. This will work with your tilting cargo carrier #e98874 and other etrailer products…

view full answer...

Answer 2

So for your wife's Ride1UP 700 Series eBike with a step-thru frame, the bike rack I like the most, that will also accommodate all the specs of her bike, is from Hollywood Racks, and is their Destination rack for ebikes: - Hollywood Racks…

view full answer...

Answer 3

If you check out the end of the review video you will see the test course video I attached to the right that shows the #e98874 being used in our back lot that has speed bumps installed in it you will see that the hinge portion of the carrier is…

view full answer...

Answer 4

Congrats on your recent purchase of the 24x60 etrailer Cargo Carrier #e98874 and the Light Kit #98174LED! The correct brackets you need to install that light kit on your cargo carrier come in the kit #e98943-44. I have attached some videos for you…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 10

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 11

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack…

view full answer...