Review of Rackem Tools - Landscaping Tools - RCMMS4-EXS15 Video

The Rack'em Grass Catcher for Exmark Lawn Mower #RCMMS4-EXS15 will fit your Exmark Radius E-series 60 inch radius deck.

We offer 2 different Rack 'Em grass catchers for Exmark mowers. The catcher you need will depend on if the discharge chute is 4 or 5 inches tall. If it's 4 inches, you'd need #RCMMS4-EXS1 or if it's 5 inches, use #RCMMS4-EXS15. Each…

The #RCMMS4-EXS15 Rack'em Grass Catcher is compatible with your Exmark mower with a 5 inch tall discharge opening. This catch will only fit if the discharge opening extends out even with or past the face of the rear wheel. The extension is part…

Yes, the Rack'em Grass Catchers like the one for Exmark Lawn Mowers part #RCMMS4-EXS15 can pickup grass, leaves, and other small yard debris.

I checked with Rack'em and the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mowers part #RCMMS4-EXS1 will fit an Exmark Metro with 36" deck. It also fits the models with a 48" and 52" deck.

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

Yes, the Rack'em Grass Catcher for Exmark Lawn Mower #RCMMS4-EXS15 will fit your Exmark Radius E-series. This is designed to fit the Exmark mowers that have the discharge opening either even with or extends out past the rear wheels and I checked…

Your Exmark lawnmower will not fit the Rack'em Grass Catcher for Exmark Lawn Mower #RCMMS4-EXS15 because the design is for a 5 inch discharge opening. The #RCMMS4-EXS1 for Exmark is a fit for 4 inch discharge opening. I don't know if there is…

As long as you have a 5" discharge opening the #RCMMS4-EXS15 will fit your Exmark Quest Zero Turn. Also, your mower's discharge opening must be even with or extend out further than the mower's rear wheel in order to use this grass…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…