Difference Between Rack Em Grass Catcher # RCMMS4-EXS1 and # RCMMS4-EXS15

Question

Question:

What is the diference between this model RCMMS4-EXS1 and RCMMS4-EXS15? Just want to make sure what is going to fit to my exmark viking hydro. I see the RCMMS4-EXS1 is a little bit less on the price.

asked by: Luis

0

Expert Reply:

Measure the discharge opening of your Exmark Viking Hydro and you'll know which of the two grass catchers is what you need. If you have a 4 inch discharge opening you need the part # RCMMS4-EXS1 or if you have a 5 inch opening you'd want the part # RCMMS4-EXS15.

expert reply by: Jameson C

0

Answer 1

The Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck part #RCMMS4-EXS1-TORO will fit all Toro Lawn Mowers with a Z-Cut Deck. I don't have reference to the deck type on any one particular model but have attached a photo of the Z-Cut…

view full answer...

Answer 2

The Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1 that you referenced is a fit for the Bob Cat mower you sent a picture in of. Since your Bob Cat has a standard dock that discharges even with the rear tires this will…

view full answer...

Answer 3

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

If your Toro Titan HD has a regular deck you need the #RCMMS4-EXS1. If you have the Z-Cut deck you need the #RCMMS4-EXS1-TORO instead. If your deck isn't one of these two you could still use the Rack'Em Multi-Mount Grass Catcher #RCMMS4 but…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Difference Between Rack Em Grass Catcher # RCMMS4-EXS1 and # RCMMS4-EXS15

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching