Grass Catcher for Toro Timecutter 75754

Question

Question:

Would you please suggest the correct grass catcher combination for a Toro Zero Turn Timecutter mower model 75754 bought in May 2021. This mower does not have the Z cut deck. Pictures are attached below. Thanks

asked by: Harold C

0

Expert Reply:

Since your Toro Timecutter does not have the Z cut deck the Grass Catcher you'd need is the part # RCMMS4-EXS1.

expert reply by: Jameson C

0

Answer 1

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1.

view full answer...

Answer 2

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

view full answer...

Answer 3

I looked into this before and from what I found your TimeCutter Zero Turn Mower does not have the Z-cut deck so the Rack'em Grass Catcher #RCMMS4-EXS1-TORO would fit and work well. You can verify this by measuring the height of the opening and if…

view full answer...

Answer 4

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1. The Z deck has notches or slots in it as…

view full answer...

Answer 5

Your Toro Timecutter should have the Z-Cut deck. I have attached a picture below so you can confirm. You will want the Rack'Em Grass Catcher for Toro Lawn Mower with Z-Cut Deck item #RCMMS4-EXS1-TORO. The custom face plate provides the connection…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If your Toro Titan HD has a regular deck you need the #RCMMS4-EXS1. If you have the Z-Cut deck you need the #RCMMS4-EXS1-TORO instead. If your deck isn't one of these two you could still use the Rack'Em Multi-Mount Grass Catcher #RCMMS4 but…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The Rack'em Grass Catcher for Scag Lawn Mower with Velocity Deck #RCMMS4-OVBS1 comes with the faceplate you need along with all hardware needed for installation. The extension you are seeking is the Extension for Rack'em Multi-Mount Grass…

view full answer...

Answer 10

The correct Grass Catcher for your Scag Liberty Z48 is the part #RCMMS4-OBS1.

view full answer...

Answer 11

According to the owners manual for your 2004 GMC Sierra 1500 4x4 extended cab with the automatic transmission it carries either a maximum trailer weight of 7,800lbs or 8,800lbs depending on the axle gear ratio. If you have 3.73 gears it is rated for…

view full answer...

Answer 12

A 5/8" diameter hitch pin is usually made of steel, though some have coatings applied to help resist corrosion. For example, the Master Lock Pivot Lock Hitch Pin for 2" Hitches #ML1465DAT is made of stainless steel, but there is also a…

view full answer...

Grass Catcher for Toro Timecutter 75754

Product Page this Question was Asked From

Continue Researching