Correct Curt Q24 Slider Hitch for a 2013 Ford F-350 6-3/4' Bed with the Factory Prep Package

Question

Question:

I have a 2013 F350 super duty Platinum with factory puck system in short bed. Amazon says this Q24 slider doesnt fit but etrailer says yes. It looks like it should fit but before I order I want to be sure.

asked by: Don R

0

Expert Reply:

I can't confirm what you are seeing elsewhere but what I can confirm is that if you purchase the Curt Q24 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package part # C16545-16020 from us, it will fit a 2013 Ford F-350 6-3/4' Bed with the Factory Prep Package.

expert reply by: Conner L

0

Answer 1

Both the Curt Q-24 5th Wheel Hitch w/Slider for Ford Prep, #C16545-16020, and the Curt Q20 5th Wheel Hitch w/ Slider for Ford Prep, #C16530-16020, will work well on your 2016 Ford -F350 Super Duty with the Ford prep package. Both hitches will fit the…

view full answer...

Answer 2

The Curt Q24 fifth wheel slider hitch part #C16545-16020 weighs a total of 281 lbs and the Q20 #C16530-16020 weighs 278 lbs. So they are about the same and considering the overall weight of the hitches there wouldn't be a noticeable difference.

view full answer...

Answer 3

The Curt Q24 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package #C16545-16020 is 20-1/2" in length x 32-1/2" in width. The handle points directly up so you won't have to worry about it protruding out towards the auxiliary…

view full answer...

Answer 4

The height adjustments for the Curt Q20 5th Wheel Trailer Hitch with Slider for Ford Towing Prep Package #C16530-16020 measure from 17-1/2 inches - 21-1/2 inches from the bottom of the truck bed to the top of the hitch skid plate. I spoke with my…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 10

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 11

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Correct Curt Q24 Slider Hitch for a 2013 Ford F-350 6-3/4' Bed with the Factory Prep Package

Continue Researching