Lightweight Hitch Cargo Carrier for 2019 Tesla Model X

Question

Question:

Thank you – do you think this roof box will fit? TH6359B

asked by: Rich

0

Expert Reply:

The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs.

For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Rich

8/17/2020

I bought a 2018 Volvo XC90. It has factory raised rails. I went to the Yakima site and they recommended RailBar Single Bar XL / Silver RailBar Single Bar LG / Silver I can’t translate to your guys products – I don’t see anymore information on Yakima about what size is a XL and LG. Can you help?

Reply

Jameson C.

8/17/2020

For a Yakima Railgrab roof rack that fits your new 2018 Volvo XC90 the part number you'd want from us is made up of parts # Y01157, # Y00147, and # Y03541.

Reply

Rich

8/18/2020

Thank you – do you think this roof box will fit? TH6359B

Reply

Jameson C.

8/18/2020

Yes the Thule cargo box # TH6359B would fit and work great on the Yakima rack and on your Volvo.

Reply

Answer 1

The SeaSucker Monkey Bars Roof Rack #298-SX6000B is still the best and only option for installing a roof rack on your 2020 Tesla Model X. All the information from Heather in the question you asked from is still relevant for your vehicle. Like using…

view full answer...

Answer 2

The Pro Series Cargo Carrier part #PS1040100 that you referenced weighs 70 lbs. For a somewhat similar dimension carrier that's aluminum and much lighter the part #C18113 would be a great option as it weighs 26 lbs. It's dimensions are…

view full answer...

Answer 3

It sounds like you have the Yakima HD crossbars similar to the #Y01156. These are attached and held in place by the HD Bar SL Adapter #Y03541 on your roof rack towers and the #Y03541 would be the correct way to replace one of those. The HD Bar SL…

view full answer...

Answer 4

The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part #TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a…

view full answer...

Answer 5

Yes you can, the Yakima Backswing pivoting hitch adapter part #Y02483 that you referenced actually comes with a locking hitch pin too so you wouldn't need to get one separately.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in the…

view full answer...