Does Firestone Ride-Rite Spacer Block Come With Hardware?

Question

Question:

Does it come with the bolt to secure it in place?

asked by: Glenn P

0

Expert Reply:

The Replacement Spacer Block for Firestone Ride-Rite Air Helper Springs # F2135825336 does not come with hardware. The bolt needed for the spacer will need to be obtained locally from a hardware store. You will simply need a slightly longer bolt with the same diameter that came with your air springs.

If you instead get the Lift Spacers for Firestone Ride-Rite Air Helper Springs - 1-1/4" Spacers - Qty 2 # F2536 it will come with the bolts needed.

expert reply by: Jason S

0

Answer 1

Yes, you will need to add a spacer between the bottom of the airbag bracket and the bottom of your airbag if the distance between the top of your bottom bracket and the bottom of your top bracket is between 6-1/2" to 7-1/2". For this I…

view full answer...

Answer 2

The Lift Spacers for Firestone Ride-Rite Air Helper Springs part #F2366 (2") works with all Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs and Firestone Ride-Rite Air Helper Springs (Like 2597) so this is what you'll want to…

view full answer...

Answer 3

You are correct. Since you have a 1-1/2 inch "lift" on your truck you'd need the Firestone 1-1/2 inch spacer kit part #F2536 to take up that additional space.

view full answer...

Answer 4

Typically block lifts are body lifts which do not add distance between the axle and the frame. If that's what you have then the Firestone Ride Rite kit part #F2709 would fit as-is. If you do have a lift that adds distance between the axle and the…

view full answer...

Answer 5

I do have an option for you but SuperSprings does not offer any additional spacers for the SumoSprings Trailer Helper Springs part #SS26MV. That said, we do still have spacers that will work for this, the Timbren Spacer part #A25723-90AH00 for…

view full answer...

Answer 6

The rebound clip on a leaf spring such as double-eye spring #e54SR will be positioned with about 1/2-inch of the shortest leaf sticking out past the clip. The clips do two things: they help maintain alignment of the various spring leaves but more…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Does Firestone Ride-Rite Spacer Block Come With Hardware?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching