MaxxAir Roof Vent for RV that is Compatible with Wall Control Unit

Question

Question:

I have A Max Air Powered Fan in my 2015 Grand Design Solitude now that quit opening. Can I get a replacement that will work with the wall mount I have ?

asked by: Patricia P

1

Helpful Expert Reply:

If you have the wall control part # MA00A03550K installed in the wall of your trailer the Maxxair Fan part # MA00-04751KSX would easily integrate into it and work great. If you have a different switch setup let me know and I'll see what options you may have.

expert reply by: Jameson C

1

Answer 1

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 2

Actually the type of roof vent cover you need to attach to the vent cover brackets of your Maxxair 4951KS like part #MA00-04500K is the part #MA00-955003 which uses those brackets with the included cotter pins of the cover.

view full answer...

Answer 3

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 4

For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.

view full answer...

Answer 5

I am afraid we do not carry the exact model fan 00-04951KSCX that you are looking for. We do have the MaxxAir #MA00-04751KSX which is a very similar MaxxFan Plus Roof Vent. This will be a suitable replacement for your vent, if you are looking to…

view full answer...

Answer 6

Yes, the MaxxAir MaxxFan Plus Roof Vent #MA00-04751KSX that you referenced would easily replace the MaxxFan you currently have installed in your 2015 Montana 36RL as this fits the same size RV roof opening.

view full answer...

Answer 7

The switch on your wall is only turning the power on and off for the fan. With a powered lift there wouldn't really be a way to tap into the function and wire it to a switch to make it easier to access. The only option would be to replace the…

view full answer...

Answer 8

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

MaxxAir Roof Vent for RV that is Compatible with Wall Control Unit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching