Are Mounting Brackets for Curt RV Trailer Hitches Available Separately

Question

Question:

Can I purchase just the mounting brackets? I purchased the 13703 kit from etrailer and the brackets defiantly wont work on my rv.

asked by: Jason B

0

Expert Reply:

I reached out to Curt and the mounting brackets for the Adjustable Width Trailer Hitch Receivers # 13703 and # C13704 aren't available as replacement parts so if the brackets on your current hitch doesn't work then you'll need to get a whole replacement hitch instead.

expert reply by: Jon G

0

Answer 1

The length of the mounting brackets for the Curt Trailer Hitch Receiver #14053 is 15-1/8" as you can see from the attached photo. Since the frame is extended past the regular body length it could very well affect the towing capacity of your…

view full answer...

Answer 2

There are a number of bike racks that have been rated for use on the back of 5th wheels and motor homes. I recommend going with the Yakima LongHaul 4 Bike RV Rack #Y02476 which works on 2" hitches. With the Yakima, you get a high quality product…

view full answer...

Answer 3

For your Forest River No Boundries 19.3 NoBo, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704. This hitch receiver is rated for tongue weights up to 500 lbs. I can't confirm your bike rack is…

view full answer...

Answer 4

The cross tube on the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 is 68.5 inches from tip to tip without the hanging brackets. It has a max weight capacity of 5000 pounds and a max tongue weight of 500 pounds.…

view full answer...

Answer 5

For your 2012 Jayco Jay Flight 26RLS Trailer the Curt Adjustable Width Trailer Hitch #C13704 will work really nicely. This particular Class III hitch is designed specifically for applications like this, as it can be bolted directly to the frame rails…

view full answer...

Answer 6

If your camper has a frame width between 22 and 66 inches the Curt #C13704 would potentially work as it can bolt on and has a 500 lb tongue weight capacity.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Are Mounting Brackets for Curt RV Trailer Hitches Available Separately

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching