Curt RV and Camper Hitch - Frame Mount Hitch - 13703 Review Video

The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704 has brackets that are 10 inches long with mounting holes 8-1/2 inches center on center. The height is right at 5-1/2 inches tall. I've attached a…

For a trailer hitch receiver for your travel trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703. This hitch can be welded for a no-drill application as you stated, or it can be bolted in…

I have a solution for you, but the Curt #C15325 is a custom fit hitch designed for older Chevy K-Series pickups; the distance between the mounting holes from side to side will be approximately 35". We have seen many folks these days adding…

The best option we have would be a universal adjustable width trailer hitch, the Adjustable Width Trailer Hitch Receiver part #C13704. These are designed for applications in which custom trailer hitch fit options are not available. The width can be…

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

The hitch pin will end up behind the air dam of your 2020 Ford F-250 when you install the Curt hitch part #C31078 on it. Once cut the air dam is very easy to flex so that you can access the hole as needed.

The Demco Hijacker Autoslide 5th Wheel Hitch w/ Slider part #DM8550024 is a better option for an auto slide compared to the Pullrite SuperGlide because the Hijacker has 3 different height settings 15-1/2", 16-3/4", and 18-1/4" compared…

Since the markings and numbers are weathered away on your pin box you can measure the bolt pattern to find the correct replacement. I've attached a picture and our help guide to help you with these measurements. Once you have the measurements I…

The Hollywood Racks RV Rider part #HLY647FR is rated for heavier bikes like your electric mountain bikes and is also rated for the rougher ride quality that is present at the rear of motorhomes. This rack has an 80 lb weight capacity and would work…

The only bike rack we offer or that is readily available for that matter which is rated for both the weight of e-bikes and the abuse of the ride on the rear of a fifth wheel trailer is the Hollywood Racks RV Rider 2 Bike Platform Rack for E-Bikes…

I went out to the warehouse and measured Curt trailer hitch #C13704 for you. The distance from the top of the mounting flanges to the top of the cross tube is 2 inches. I have included some pictures with additional measurements for you.

The MORryde Locking RV Storage Box #MR43RR sits close enough to the stairs that I don't think you'll have the ability to open up the door. If you already have the steps installed you can mock up the door to see if it will open with out any…