Does the Draw-Tite Hitch 36297 for a 2007 Volvo XC70 Come With Bolts

Question

Question:

Are bolts included with this product? If not, what bolts are needed? Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 Item # 36297 For Volvo XC70 WAgon

asked by: Lara G

0

Expert Reply:

The Draw-Tite Trailer Hitch Receiver part # 36297 which is a fit for a 2007 Volvo XC70 (All Models) does not come with hardware. That said, you won't need to obtain any either as it uses existing bolts already on the vehicle.

expert reply by: Conner L

0

Answer 1

All of the available trailer hitches for a 2004 Volvo XC70 are class II hitches with a gross trailer weight capacity of 3,500 pounds and a tongue weight capacity of 300 pounds. If the combined weight of your horse and trailer (loaded and ready to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

To add a hitch to your 2024 Chevrolet Trailblazer, I recommend the Draw-Tite item #DT55GR. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing…

view full answer...

Answer 11

Sorry to hear about your car accident and your hitch and bike rack being damaged. As far as installing a new hitch, the first thought that comes to mind is, because of the accident, are all the necessary attachment points for a trailer hitch on the…

view full answer...

Answer 12

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Does the Draw-Tite Hitch 36297 for a 2007 Volvo XC70 Come With Bolts

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching