Weld Nut Removal and Replacement Review Video

Broken weldnuts can be rather annoying when trying to install a hitch. It's a fairly common problem that we see and because of that we made an FAQ video on how to address this problem. Check out the video I attached to see it. You will need a…

The SeaSucker Monkey Bars Roof Rack #298-SX6000B would be able to handle the dynamic (or weight while moving) weight of a Thule Tepui rooftop tent (or any rooftop tent for that matter) but the issue is with the static weight rating which is what it…

I want to start by thanking you again for your recent order. We appreciate your business. When it comes to installing the Curt Trailer Hitch Receiver, #C13068, on your 2002 Honda Odyssey, it is best to just clean out the bolt holes on your frame…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Draw-Tite Trailer Hitch Receiver part #36297 which is a fit for a 2007 Volvo XC70 (All Models) does not come with hardware. That said, you won't need to obtain any either as it uses existing bolts already on the vehicle.

All of the available trailer hitches for a 2004 Volvo XC70 are class II hitches with a gross trailer weight capacity of 3,500 pounds and a tongue weight capacity of 300 pounds. If the combined weight of your horse and trailer (loaded and ready to…

For your 2018 Honda Odyssey, I definitely recommend going with the etrailer Class III Round Tube Hitch #e98855. This particular trailer hitch has an estimated installation time for somebody with some experience of around 30 minutes. We rate the…

I may have a solution for you, but there are not fat tire adapters available for the Swagman Semi 2.0 2-Bike Platform Rack #S64686 so it's not a good choice for bikes with tires wider than 3". If you don't have a carbon frame bike, the…

The really big difference between the Thule T2 Pro XTR part #TH69TX and the Thule DoubleTrack #TH92BJ is how the rack attaches to the bikes. The T2 attaches by grabbing the bikes at the tire and the Doubletrack grabs the frame. The advantage to a…

What you can do is use a bolt leader like #80101-1 with a carriage bolt block through an open portion of your frame to basically act as a weld nut so you can install the hitch. This normally is a solution we use when a vehicle has a broken weld nut…

I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block #RP3022. The size of this spacer block is 1/4" x 1" x 3". If you are…

Yes, depending on the hitch you choose, you will have to modify, reinstall, or remove entirely the heat shield from your 2020 Subaru Forester. While all the hitch options for your Forester except for the EcoHitch #306-X7391 are roughly the same…