Parts Needed to Install Brake Controller in 2013 Subaru Outback with 4-Way

Question

Question:

I have a question about trailer plugs. I currently have a standard 4 flat on my 2013 Subaru Outback. I am renting a trailer that has a 7-way plug and electronic brakes. My question is do i need a brake controller inside the cab or can i get away with just the part # ETBC7.

asked by: Blaine

0

Expert Reply:

The # ETBC7 would just cover the wiring for a brake controller and the adapter to convert the 4-way to a 7-way so it would not be all that you'd need. You'd need to use it and a brake controller like the BRAKE-EVN part # TK63VR to activate the trailer brakes. Another easier option (more expensive) would be the Curt Echo Mobile part # C51180 which plugs into a 7-way and once synced to your smart phone is ready to tow.

To convert the 4-way to a 7-way so that you can install the brake controller only requires the 7-way adapter kit part # ETBC7L. The 4-way of this plugs into the 4-way of your vehicle and once you run the included wiring and breaker up to the vehicle's positive battery post it's active enough to allow the Echo to function. This saves you from having to hardwire in a brake controller which requires tapping into the brake signal of your vehicle and running a few other wires too.

expert reply by: Jameson C

0

Answer 1

If you are looking for a way to 7-way trailer wiring on your 2015 Subaru Outback Wagon you will first need to start with a 4-way. For that you will want the part #C56040. (see install video). Now if your trailer doesn't have brakes all you…

view full answer...

Answer 2

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 3

In order to convert the 4-way to a 7-way on a 2013 Subaru Outback I have two options, cost effective and easy install. I highly recommend going the easy install route as the difference is pretty substantial in regards to modifications needed to the…

view full answer...

Answer 4

In order to carry a bike rack on the back of your Taxa Cricket travel trailer with 40" between the frame members you can use the Curt Adjustable Trailer Hitch #C13701 which will fit on trailer frames between 18" and 51" wide. This…

view full answer...

Answer 5

It appears you have it figured out on your parts. My only alteration on the parts would be using the Curt Easy Mount Bracket #C58000 to attach 7-Way #ETBC7 rather than the Mounting Plate #18136. This is due to having the hidden cross tube on etrailer…

view full answer...

Answer 6

Welcome back! Happy to hear you like the hitch. Since the crosstube on the Curt Hitch item #C13410 is hidden behind the rear bumper and plastic underbody trim you will need to use the Curt Easy Mount Bracket for 7-Way Trailer Connectors item #C58000.…

view full answer...

Answer 7

The distance between the center of the ball hole and the hitch pin hole of the Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount #CAB-UM is 11 inches.

view full answer...

Answer 8

Good Afternoon Lucas, you are on the right track for the easiest way to install a brake controller on your 2020 Subaru Outback Wagon. The Curt Echo brake controller part #C51180 is unlike any other brake controller on the market at this time…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...