Hopkins Multi-Tow Trailer Connector Installation - 2020 Toyota Tacoma Video

If you are just looking to tow a trailer with lights and without brakes, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56349. This will give you a 4-Pole flat on the back of the Tacoma to tow a…

Thanks for the picture! Yes, it will. The old factory connector on your 2005 GMC Yukon XL Denali will pop out once you disconnect the wiring harness and you'll be able to insert the Curt Replacement OEM USCAR Trailer Connector item #C42JR.

You can definitely use the Curt T-Connector Wiring Kit #C56349 along with the Hopkins Multi-Tow 7-Way Blade and 4-Way Flat Trailer Connector #HM11141144 on your 2022 Toyota Tacoma just like what we did with the 2020 model year (which I've…

The 4-way install harness part #C56020 that you referenced is a confirmed fit for your 2005 Ford E-150 van and would be one component needed to install your Curt Echo part #C79DR. You would also need the part #C26DR with 10 gauge wire part #10-1-1…

The only plug-in-play trailer wiring harness available for a 2020 Toyota Tacoma is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56349 so that is what I recommend using. Next you will need a Curt 4-Way Flat to…

The Hopkins 7-way part #HM11141144 that you referenced normally fits a bracket like the part #HM40978 which I attached a picture that shows all of the dimensions of.

That bracket is specific to some vehicles; if you could tell me what vehicle you have I would be able to give you the appropriate vehicle wiring and mounting options.

The only trailer wiring harness options we offer for a 2020 Toyota Tacoma are those that plug-in behind the tail lights, the Curt T-Connector Vehicle Wiring Harness part #C56349 for a 4-way or part #22117 for a 7-way. In order to use the cutout in…

The wires on the Hopkins wiring harness item #HM11141144 are 6" long. I recommend using butt connectors instead of splicing the wires together so you have plenty of room. I have linked an install video. You will need 2 different size butt…

As you can see by the accompanying diagram I added, a 6-way such as the Pollak #PK11609 does not have a function for reverse lights; that function is on a 7-way so you would not connect the wire you referenced to your trailer connector. A 6-way has…

Thank you for your recent purchase from etrailer.com. If you purchased a 2-fuse bypass and only need a single you can certainly still use this item in your application. The bypass will still function to override the mini fuse when switched to the Tow…

In regards to trailer wiring harnesses, there are two main types, 4-way and 7-way. The 4-way is used on smaller trailers without electric brakes and the 7-way is used on larger trailers with electric brakes. The trailer brakes won't work unless…