What Size Socket Is Used to Install Hardware for Curt Hitch for 2018 Nissan Frontier

Question

Question:

Do the 12 M bolts with this hitch require a 19 mm socket? Is that the correct size socket?

asked by: Robert

0

Expert Reply:

Yes, the install hardware for the Curt hitch part # 13241 that you referenced does requires a 19 mm socket. For more info on the install you can check out the install video I attached as well as the install instructions link.

expert reply by: Jameson C

0

Answer 1

I had the Curt #13241 measured and have said measurements listed below. Please keep in mind this is designed to fit a 2005 to 2021 Nissan Frontier and a 2009 to 2012 Suzuki Equator. (Red) Overall length of the hitch (end to end) - 45 7/8 inches…

view full answer...

Answer 2

It truly depends on the hitch you purchase for your 2022 Nissan Frontier SV. For example, if you go with the Curt Hitch 2" #13241, this hitch uses M12 x 1.25 bolts. It is important to note, however, that the bolts and all other hardware…

view full answer...

Answer 3

The Curt hitch part #13241 that you referenced uses a total of 6 M12-1.25 x 35mm hex bolts and six 7/16 inch conical tooth washer. You would want to get grade 5 or higher bolts from your local hardware store. Since hitch hardware is considered one…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 12

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

What Size Socket Is Used to Install Hardware for Curt Hitch for 2018 Nissan Frontier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching