What Mounting Bolts Attach to the Hitch of a 2022 Nissan Frontier?

Question

Question:

What size bolts do I need to mount your trailer hitch on a 2022 Nissan Frontier SV ? Im trying to get all the items I need before I start this installation . Thank You.

asked by: Luther F

0

Expert Reply:

It truly depends on the hitch you purchase for your 2022 Nissan Frontier SV. For example, if you go with the Curt Hitch 2" # 13241, this hitch uses M12 x 1.25 bolts. It is important to note, however, that the bolts and all other hardware are included with all of our hitches for your vehicle.

If you need a hitch recommendation, I recommend the # 13241 because it comes with a superior gloss outer coat over the base powder coat that provides you with superior protection against rust/corrosion than our other brands. Also, it comes with a concealed crosstube that eliminates any bulky eyesores on your new Frontier. This provides a more factory look on your vehicle. It also comes with a super easy installation that takes only about 30 minutes to complete.

I went ahead and attached a helpful installation video that shows the # 13241 being installed on a 2022 Frontier.

expert reply by: Bob C

0

Answer 1

The Curt hitch part #13241 that you referenced uses a total of 6 M12-1.25 x 35mm hex bolts and six 7/16 inch conical tooth washer. You would want to get grade 5 or higher bolts from your local hardware store. Since hitch hardware is considered one…

view full answer...

Answer 2

I had the Curt #13241 measured and have said measurements listed below. Please keep in mind this is designed to fit a 2005 to 2021 Nissan Frontier and a 2009 to 2012 Suzuki Equator. (Red) Overall length of the hitch (end to end) - 45 7/8 inches…

view full answer...

Answer 3

Sometimes hitches can get slightly bent during shipping and this can be fixed by bending the hitch back into place as long as the hitch only has a slight bend to it. If yours isn't lining up I can almost guarantee that is what happened. Some…

view full answer...

Answer 4

Yes, the install hardware for the Curt hitch part #13241 that you referenced does requires a 19 mm socket. For more info on the install you can check out the install video I attached as well as the install instructions link.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

What Mounting Bolts Attach to the Hitch of a 2022 Nissan Frontier?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching