TorkLift Super-Hitch and Tie Downs for my 2019 Ram 3500 6.5' Bed and Step Under the Cab

Question

Question:

I have a 2019 Ram 3500 Megacab dully. I wanted to install a magnum superhitch and the camper tiedowns. The truck has the stock electric steps on the cab. Not sure what setup I need for my truck.

asked by: David H

0

Expert Reply:

We can get the kit you need figured out. Let's start with the hitch. For you 2019 Ram 3500 with the 6.5' bed use the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1111-30.

As far as the tie downs use the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part # TLD2141 and rear part # TLR3510. These are designed for the steps under the cab and are designed specifically for your 2019 Ram.

expert reply by: Randy B

0

Answer 1

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item #TLR3510 is competing for the same space as the step so unfortunately there isn't a work around for this tie down. Instead you could replace the steps that bolt onto the wall of…

view full answer...

Answer 2

The TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1112-30 does come with the dual receivers so you will have to remove the factory hitch from your 2020 Ram 2500 for this install. I reached out to my contact at TorkLift to confirm this and…

view full answer...

Answer 3

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the…

view full answer...

Answer 4

To determine the correct Sidewinder for your 2025 Keystone Cougar 2700BH we'll need to first determine the bolt pattern. There's typically a sticker some where on the pin box or mounting ears that has a serial number, LCI item number, and RPO…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

For your 2018 Ram 3500 dually long bed we have the Torklift hitch part #TLD1108 that is a confirmed fit and would work great.

view full answer...

Answer 7

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you will…

view full answer...

Answer 8

The difference is the part #TLD3113 fits the 2020 Ram 2500 and the part #TLD3112 fits the 3500 models. They are not interchangeable. Since you have a 2500 model you would want the TLD3113.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long #RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of…

view full answer...

Answer 11

In order to install Curt trailer hitch #C15800 on your 2012 Dodge Ram 4500 cab and chassis model you will have to drill into the frame because, like you have said, there are no holes in the frame already. The rivet that is in the rear most part of…

view full answer...

Answer 12

The correct rear Torklift camper tie down for your 2020 Ram 3500 that has a Torklift Super Magnum Hitch is the part #TLR3510.

view full answer...

TorkLift Super-Hitch and Tie Downs for my 2019 Ram 3500 6.5' Bed and Step Under the Cab

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching