TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1504 reviews)
Price: $387.71
In Stock
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Item # TLR3510
Our Price: $387.71
In Stock
- All Info
- Reviews (1504)
- Q & A (0)
- Photos
- Used (1)
TorkLift Camper Tie-Downs - TLR3510
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
R3510 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit - SuperHitch Application
This Product Fits The Following Vehicles
- 2019 - 2024 Ram 2500 6-1/2 Foot Bed - with board or step extending under bed and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 2500 6-1/2 Foot Bed - with board or step underneath cab and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 2500 6-1/2 Foot Bed - without board or step and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 2500 8 Foot Bed - Crew Cab - with board or step extending under bed and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 2500 8 Foot Bed - Crew Cab - with board or step underneath cab and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 2500 8 Foot Bed - Crew Cab - without board or step underneath truck bed or cab and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 3500 6-1/2 Foot Bed - with board or step underneath cab and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 3500 6-1/2 Foot Bed - without board or step and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2021 Ram 3500 8 Foot Bed - with board or step extending under bed and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 3500 8 Foot Bed - with factory electric board under cab and with a TorkLift SuperHitch Magnum 30K
- 2019 - 2024 Ram 3500 8 Foot Bed - without board or step and with a TorkLift SuperHitch Magnum 30K
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLR3510
Average Customer Rating: 4.7 out of 5 stars (1499 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Patrick 08/21/2023
I installed these on my 2022 Ram 3500 SRW over a year ago for use with a Northern Lite 9-6 camper. Excellent instructions, installation was easy with simple tools, fit and finish is very good and they perform exactly as required. Definitely recommend!
by: Daniel 09/30/2023
The torklift rear camper tie came yesterday, 3 days earlier than expected. I put them on this morning it took maybe 30min. Looks like they will work excellently. Thanks etrailer for your advice. Right ones great fit.
by: Darren 04/26/2024
These took me about 15 min to install!! Great product!! Cant wait to try the complete system now that it is on my truck.
by: Calvin 01/04/2023
very solid tie down
by: Jeremy 05/21/2021
The mounts are everything they were advertised to be. Unfortunately it took etrailer a month to even ship it although they said that it was in stock.
by: David 09/01/2022
Easy to install. Fits perfect !
by: Robert 02/09/2021
Wouldn’t use anything else
by: Jason 09/19/2020
This has worked out great.
by: Kristy-Jon03/13/2024
by: Justin 10/25/2023
by: 05/16/2023
by: William03/13/2020
You’re not gonna beat the quality or se rvice
by: Keith05/16/2022
by: Max 05/08/2024
by: Ken 01/08/2024
by: Edward 08/29/2022
by: Thomas 09/21/2022
by: Bill03/23/2021
by: John 06/25/2021
by: Brett 05/28/2021
by: Julie 11/20/2020
by: Carson P09/10/2021
by: Lawrence 08/14/2022
by: Tom 10/30/2021
by: Stephen01/08/2021
25
1503
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Correct TorkLift Camper Tie-Downs for 2019 Ram 3500 Short BedThe correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs # TL52XR (front) and # TL34FR (rear) or -TorkLift Camper Tie-Downs # TLD2141 (front) and # TLD3112 (rear) With a TorkLift SuperHitch Magnum 30K -TorkLift Camper Tie-Downs # TLD2141 (front) and # TLR3510 (rear) Keep in mind, none of these will fit if you have the aftermarket...
view full answer... - Torklift Truck Camper Tie-Downs For My 2019 Ram 3500 4X4 Diesel Your 2019 Ram 3500 4X4 diesel with the 8' bed and factory running boards under the cab. You have two options, depending on your vehicle's options. If you have the 8' bed with a fixed board under your cab with factory installed hitch, you will need the following items. TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Front, part # TL94FR TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Rear, part # TL34FR If you have the 8' bed with a factory electric...
view full answer... - Correct Rear Tie Down for 2020 Ram 3500 with Torklift 30k Super Magnum HitchThe correct rear Torklift camper tie down for your 2020 Ram 3500 that has a Torklift Super Magnum Hitch is the part # TLR3510.
view full answer... - Torklift Superhitch Magnum and Camper Tie Downs that Fit 2020 Ram 3500There was a big enough change between the 2017 and 2020 Ram 3500 that a new hitch and tie downs would be required. For the hitch you'd want the part # TLD1111-30 and for the tie downs # TLD2142 and # TLR3510.
view full answer... - Which Torklift Camper Tie Downs Fit 2019 Ram 3500 That Has OEM Electric Side StepsWe have a set of Torklift Camper Tie Downs that fit your exact configuration of 2019 Ram 3500 long be with factory electric steps and factory hitch with the part numbers # TLD2140 for the front and # TLD3112 for the rear but the # TLR3510 is only the correct rear fit for if you had a Torklift hitch installed. If you had the Torklift hitch though this would fit and would still allow the step to function like normal without requiring you to remove it.
view full answer... - Which Rear Torklift Tie Down to Use with SuperHitch on 2019 Ram 3500If you install the Torklift Superhitch Magnum part # TLD1111-30 on your 2019 Ram 3500 that currently has the rear tie down part # TLD3112 and a factory hitch you would need to replace the tie down with the part # TLR3510 according to Torklift. So yes you would need to replace the rear tie down at same time.
view full answer... - TorkLift Super-Hitch and Tie Downs for my 2019 Ram 3500 6.5' Bed and Step Under the CabWe can get the kit you need figured out. Let's start with the hitch. For you 2019 Ram 3500 with the 6.5' bed use the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1111-30. As far as the tie downs use the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part # TLD2141 and rear part # TLR3510. These are designed for the steps under the cab and are designed specifically for your 2019 Ram.
view full answer... - Torklift Truck Bed Camper Tie-Downs for 2022 Ram 2500 Crew Cab Long BedFor the front tie-down, you'd use the Torklift # TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed. If you have the factory hitch, use # TLD3113 for the rear, or if you have the TorkLift Super Hitch Magnum, use # TLR3510. There are a couple of fit caveats: • Product does not fit vehicles with aftermarket Mopar rear-mounted kick out steps that are mounted under the bumper. • On dually trucks, the rear camper anchor...
view full answer... - Will Torklift TLD2142 Fit 2019 Ram 3500 With Running Boards Extending Under BedYes, the # TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the # TLD3112 if you have the factory hitch or # TLR3510 if you have the TorkLift SuperHitch Magnum 30K.
view full answer... - Solution for 36 Inch Hitch Extension on 2020 Ram 3500 With Arctic Fox 992 CamperThe only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long # RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of tongue weight at 41" with weight distribution. Also, this does not have lateral-support safety chains like the TorkLift does. When you use a really long extension like the # TLE1536 there is a lot of additional force. This is why it seems like overkill to use this...
view full answer... - torklift component questionsI have a couple of suggestions for you but you are really doing good on your kit so far. The TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLD1111-30 is what you want for the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear part # TLR3510 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front part # TLD2141 are a confirmed fit so to this point you are golden. For the suspension upgrades what you have will work. Using the TorkLift StableLoad Suspension Upgrade w...
view full answer... - Camper Tie Downs and Torklift 30k Hitch that Fits 2022 Ram 3500 DuallyThe correct Torklift Camper Tie Downs for your 2022 Ram 3500 would be the part # TLD2141 and # TLR3510 which is also correct for use with the Torklift 30k hitch that fits your truck part # TLD1111-30. Since you have a dually you will also need to measure your camper to determine if you need the part # TLA7004 as well. Measure from front of camper slide in point to rear anchor point; kit is needed if less than 90 inches.
view full answer... - Parts Needed to Tow and Use Camper For 2019 Ram 3500 Mega Cab Short Bed With Factory HitchOkay, so there's a lot to get to here, starting with the fact that since you need an extension, you will also need to add a TorkLift hitch and weight distribution system. The reason for that is, standard extenders don't have the capacity needed for you to tow, but you can do this if you add the TorkLift hitch and extenders. The only thing I can't tell you is the length you need as that's something you'll have to measure for. But there are a variety of lengths available. For your 2019 Ram...
view full answer... - How Long to Install Torklift Hitch and Camper Tie Downs 2022 Ram 3500Most shops would probably charge you one hour of shop time to install the Torklift SuperHitch Magnum part # TLD1111-30 on your 2022 Ram 3500. The correct Torklift Camper Tie Downs would be the part numbers # TLD2140 and # TLR3510. This will probably take a couple hours for both the front and back. Possibly more though. We don't get an install book for times so we can only make a best guess.
view full answer... - TorkLift SuperHitch, Tie-Downs, Turnbuckles and Hitch Extensions For a 2023 Ram 3500 Dually Long BedYou are going to need the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1111-30 for your 2023 Ram 3500. The TorkLift Custom Frame-Mounted Camper Tie-Downs Front # TLD2140 and Rear # TLR3510 will fit with the Torklift Magnum and electric steps under the cab of your Dually long bed. The TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK will secure your slide in camper to your Ram. You will need one of the extensions below depending on how far the camper sticks behind your truck....
view full answer... - Truck-Bed Camper Troubleshooting For Tie-Down / Step Space Issue The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item # TLR3510 is competing for the same space as the step so unfortunately there isn't a work around for this tie down. Instead you could replace the steps that bolt onto the wall of the camper like the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 3 Steps - 375lbs - Black Bracket Item # TLA7833. There are a few different options depending on the entry height of your camper which you can see in the chart I've attached....
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Surface Scratches
Notes: Parts are scratched and scoffed up, otherwise fine.
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Jonathan Y
Written by:
Kristina F
Installed by:
Michael B
Installed by:
Andy C
Updated by:
Isabelle B
Updated by:
Amanda K
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.