Parts Needed to Attach 100 Propane tank to RV with Two 30 lb Tanks

Question

Question:

Im not sure what i need to make my 100 lb cylinder work/hook up to my father in laws RV. He has 2 30 lb tanks and a manual regulator i think. Hes running out of propane when he heats.

asked by: Brian

0

Expert Reply:

The kit we offer that is designed for filling an RV propane tank with an auxiliary tank is the MB Sturgis Quick Disconnect Deluxe Sturgi-Stay Propane Adapter Kit # 103539-MBS which is designed for exactly what you are describing.

expert reply by: Jameson C

0

Answer 1

To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…

view full answer...

Answer 2

We have kits that are designed for connecting an auxiliary tank to a propane setup on a fifth wheel like yours. What you'd need is the MB Sturgis Sturgi-Stay T-Fitting w/ Hoses for POL Valve #103539-MBS. This is a tee fitting setup that installs…

view full answer...

Answer 3

There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour.…

view full answer...

Answer 4

It sounds like you have a POL fitting for your propane and you are wanting to change to a Type 1/ACME propane fitting. You can definitely do this as long as you use the newer propane tanks that have the threads on the outside of the tank valve. To…

view full answer...

Answer 5

To add a 100 lb tank to your two tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the pigtail…

view full answer...

Answer 6

It sounds like you are needing a hose and regulator to go from your 100 pound cylinder to the house main line. If you have a DOT tank with a Type 1 fitting, you can use a hose like the MB Sturgis Propane Pigtail #100833-15, which can connect to a…

view full answer...

Answer 7

The kit we offer that is designed for filling an RV propane tank with an auxiliary tank is the MB Sturgis Quick Disconnect Deluxe Sturgi-Stay Propane Adapter Kit #103539-MBS which is designed for exactly what you are describing. The fill hose is 6…

view full answer...

Answer 8

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 12

I looked up the hose and the regulator you currently have, and found that the GHA7 hose uses an ACME Nut connector to the LP tank and a 1/4 inch male inverted flare that connects to the 3/8 to 1/4 adapter used on the regulator. We offer the necessary…

view full answer...