Recommended Rubber Suspension Equalizer Upgrade Kit

Question

Question:

Do you guys have the morryde cre 3000 suspension upgrade for campers? I thought you guys had it but can’t find it. Thanks

asked by: Tolliver S

0

Expert Reply:

We don't carry that brand, but we do have a couple very similar options I highly recommend. I recommend the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 3K to 6K # LC279687 or the Dexter E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8" Equalizers # K71-652-00 which also comes with upgraded shackle straps and bushings. The Dexter option is my favorite because it is designed for more than the rubber equalizer for a better overall setup.

expert reply by: Jason S

0

Answer 1

Based on what you listed yes, the Dexter EZ Flex kit part #K71-652-00 is correct for your 2011 Keystone Outback Sydney. The only thing you might verify is the distance between the bolt holes from left to right on your current equalizer. They'd…

view full answer...

Answer 2

The best upgraded equalizer for your 1965 Avion Holiday is the one that matches your current equalizer measurements. This may be an Equa-Flex or it may be another brand. The most important measurement is the distance between left and right bolt holes…

view full answer...

Answer 3

There is a dimension difference between the equalizers you currently have and part #K71-652-00. I have attached drawings of the #K71-652-00 and the equalizers you currently have, part #TREQ356. As you can see the difference in the distance between…

view full answer...

Answer 4

As long as you use a qualified fabricator with trailer suspension experience you could have him weld in a spacer between your hangers so that they sit lower. Or you could install taller hangers to make up the difference. This would be the route I…

view full answer...

Answer 5

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 6

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 7

A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.

view full answer...

Answer 8

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 9

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 10

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

Answer 11

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 12

Since Grand Design is kind enough to list certain parts for their trailers I can confirm you have a 33" wheelbase on your 2020 Grand Design Transcend 27BHS. This means the MORryde Rubber Equalizers #MR87ZR will fit your trailer. Although I'm…

view full answer...

Recommended Rubber Suspension Equalizer Upgrade Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching