Where to Attach Ground Connection for 118390 Trailer Taillight Converter on 2007 Dodge Durango

Question

Question:

Im installing the TEKONSHA 118390 trailer wiring kit on a 2007 dodge Durango. The T-Connector Black Box has a short white wire with ring connector on the end of it, and the installation instructions dont mention it or indicate where it goes.

asked by: Larry K

0

Expert Reply:

Tekonsha recently upgraded the # 118390 Taillight Converter with an improved ground connection for more reliable operation. The white wire is a ground connection, and you'd use a self tapping screw to attach the ring terminal to the vehicle body behind the taillight assembly next to the converter box as shown in the provided photo.

expert reply by: Mike L

0

click to enlarge

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 5

Though it will depend on which specific kit you decide to go with, I can definitely give you an example. The MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will come with all wet bolts. All of the…

view full answer...

Answer 6

According to the owners manual for the 2005 Dodge Durango, the base model tow capacity is 2,000 pounds. But the Ram truck owners manuals say the same thing. You have to go to the Dodge towing website to determine the actual towing capacity. Which is…

view full answer...

Answer 7

Check out the picture I attached, if what you have on your 2001 Dodge Durango looks like it will attach to that then the #20135 would work well on your vehicle.

view full answer...

Answer 8

We have a very easy to install 7-way wiring kit that fits your 2020 Dodge Durango with the Tekonsha part #TK22113. This comes with everything needed for a plug and play install of a 7-way on your Durango!

view full answer...

Answer 9

Curt trailer wiring harness #C55381 will only fit your 2007 Dodge Durango if it came with the factory tow package. If you cannot find that factory connector anywhere then it is likely that your model does not have the factory tow package and you will…

view full answer...

Answer 10

If you already have a 7-Way connector at the rear of your 2006 Dodge Durango then the T-One #118381 is the correct part. If you don't have a 7-Way then you would need the T-One #118390 which is for an '06 Durango that doesn't have the tow…

view full answer...

Answer 11

You have a couple of options to add a trailer connector to your 2016 Dodge Durango Limited that did not come with the factory tow package. For a 4-Way flat connector you can use #118617. Or, if you need a 7-Way trailer connector, use #TK22113. I have…

view full answer...

Where to Attach Ground Connection for 118390 Trailer Taillight Converter on 2007 Dodge Durango

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching