Trailer Wiring Harness for a 2007 Dodge Durango without Factory Tow Package

Question

Question:

I have a 2007 dodge Durango that I added a Curt hitch to. The directions say the wiring attachment for the trailer I need is just behind the bumper. Well, its not. It looks like it comes in from above to the lights. At this point, I still cant pull a trailer. Do you have any idea?

asked by: Jay W

1

Helpful Expert Reply:

Curt trailer wiring harness # C55381 will only fit your 2007 Dodge Durango if it came with the factory tow package. If you cannot find that factory connector anywhere then it is likely that your model does not have the factory tow package and you will need a different harness.

For a model without the factory tow package I recommend Tow Ready wiring harness # 118390. I have included a link to a video showing how it installs as well as a link to the installation instructions for you.

expert reply by: Michael H

1

Answer 1

If your 2005 Dodge Durango was wired for the factory wiring harness you will be able to use the Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector, item #20135, to install a 7-Way and 4-Way connector at the rear of the…

view full answer...

Answer 2

If your 2004 Dodge Dakota has a factory 7-way the trailer wiring harness part #C55381 would fit and work well to provide you with a 4-way. If instead you did not have a 7-way you would want the part #55323 which plugs inline with the taillight…

view full answer...

Answer 3

view full answer...

Answer 4

The bar you are speaking of is capable of towing up to the tow capacity of the vehicle, if the vehicle is correctly equipped. The receiver you referenced, the CURT Class III part #13072 can handle 6000 lbs, 600 lb TW. When equipped with a weight…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" #C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the…

view full answer...

Answer 7

Check out the picture I attached, if what you have on your 2001 Dodge Durango looks like it will attach to that then the #20135 would work well on your vehicle.

view full answer...

Answer 8

With your 2006 Jeep Liberty, the factory tow package wiring is not easy to distinguish. If you have a factory 7-way that makes it easy as you know that the tow package wiring is there. The main difference between the tow package and no tow package is…

view full answer...

Answer 9

The main difference between a Class III hitch and a Class IV hitch is the capacities they set for the hitches. Class III hitches are rated for up to 6,000 lbs GTW with 600 lbs TW whereas a Class IV is rated for up to 12,000 lbs GTW and 1,000 TW. For…

view full answer...

Answer 10

According to what I found for your 2007 Dodge Ram Crew Cab 2500 diesel your truck has a capacity of 9,400 lbs. Adding air bag kits to your vehicle like the #AL88295 will help it carry it's max capacity as safely as possible but will not add any…

view full answer...

Answer 11

I looked up your 2000 Dodge Dakota Sport and it looks to have a towing capacity of between 6,100 to 6,700 lbs so as long as your trailer would weigh less than that when loaded you'd be totally fine. If you are in need of a trailer hitch I'd…

view full answer...

Trailer Wiring Harness for a 2007 Dodge Durango without Factory Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching