7-Way Recommendation for a 2001 Dodge Durango with Factory Wiring

Question

Question:

The socket that i took off the vehicle does not have a wire harness coming off of it, just a place to plug a female wiring harness into.

asked by: Bruce B

0

Expert Reply:

Check out the picture I attached, if what you have on your 2001 Dodge Durango looks like it will attach to that then the # 20135 would work well on your vehicle.

expert reply by: Jameson C

0

click to enlarge

Kee A.

11/4/2021

I have a 06 Dodge Durango I have a factory towing package but I don’t have the trailer wiring at all what do I need for the wiring the 7/4 plug I don’t have any trailer wiring for the truck at all I just have the towing package

Reply

Les D.

11/8/2021

If you contact your Dodge dealer with your VIN number they can provide you a build sheet with your included accessories. If you had a factory tow package you would have had a 7-way and 4-way electrical connector and a 2" hitch reciever at the bumper. I suspect that someone bolted up an aftermarket reciever. Take a look at the Hopkins # HM42190 wiring kit. If your truck has some prewiring behind the bumper you might get away with this kit. Otherwise you will need the Tekonsha # 118390 wiring kit and add to the # ETBC7 kit for 7-way connections.

Reply

Answer 1

It sounds like you may have a loose wiring connection or a corrosion problem on the 7-way pin for the right turn/brake lights. This pin is the one at the 3-o-clock position as you're looking at the vehicle's 7-way; please refer to the linked…

view full answer...

Answer 2

Unfortunately no, the Inno Tire Hold Bike Rack for 1 Bike #INH110 can not be expanded to a 2 bike rack. Instead, you'd have to just use an entirely different rack like #INH120which is already a 2 bike rack.

view full answer...

Answer 3

According to the owners manual for the 2005 Dodge Durango, the base model tow capacity is 2,000 pounds. But the Ram truck owners manuals say the same thing. You have to go to the Dodge towing website to determine the actual towing capacity. Which is…

view full answer...

Answer 4

To install a controller in your Dakota, you will need the controller, the #ETBC7 install kit, and a functioning 4-pole trailer connector. If your Dakota does not already have a 4-pole connector, one can be installed by using part #118323. If you do…

view full answer...

Answer 5

That is a good question, and for a travel trailer that is 36 feet long you will want to use two of the Reese Friction Sway Control Kit #83660. It is always recommended you use two of these sway control bars for trailers that are longer than 26 feet…

view full answer...

Answer 6

Yes, we do have a wiring harness for your 2021 Jeep Grand Cherokee. It is the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #118727. Tekonsha makes the most reliable wiring harnesses in the towing business. This…

view full answer...

Answer 7

To find the reverse light circuit on a vehicle is pretty easy but it may take digging around in the door panels or interior panels of the vehicle. What you need to do is find the wires that lead into the reverse lights on your vehicle. Test both of…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

For your 2024 Toyota RAV4, the best trailer hitch receiver that will fit is the following: - etrailer Trailer Hitch Receiver #e23ZR The #e23ZR is the best because it has completely concealed crosstube so only the receiver is showing, allowing your…

view full answer...

7-Way Recommendation for a 2001 Dodge Durango with Factory Wiring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching