Socket Size and Tools Needed to Install Curt Trailer Hitch Receiver on 2015 VW Jetta Sedan

Question

Question:

Hi, What size sockets do I need for installation of the C11474 hitch. Thanks

asked by: Grant

1

Helpful Expert Reply:

I have added a cut out from the instructions that shows the socket sizes needed to install the Curt Trailer Hitch Receiver # C11474 on your 2015 Volkswagen Jetta sedan. You will need 10mm, 13mm, 3/4" and 11/16" sockets for the installation.

I have added a link to a video install for you to check out as well of the Curt Trailer Hitch Receiver # C11474.

expert reply by: Kyle S

1

click to enlarge

Answer 1

Yes, the EcoHitch Hidden Trailer Hitch Receiver part #306-X7311 is a confirmed fit for a 2017 Volkswagen Jetta. In fact, I have a photo from the manufacturer on a GLI which is attached below.

view full answer...

Answer 2

I was able to find some pictures to give you a pretty good idea of what the EcoHitch Hidden Trailer Hitch Receiver #306-X7311 looks like after installation and with a bike rack as well. I reached out to EcoHitch see if I could provide you with the…

view full answer...

Answer 3

I have a great solution for adapting the 2" hitch receiver on your EcoHitch item #306-X7311 to accept a 1-1/4" accessory. You will want to use the Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver item…

view full answer...

Answer 4

I spoke to my contact at Saris and he told me that they have a solution for your bike. What he recommended was the Saris SuperClamp EX2 Bike Platform Rack #SA4025F. This rack will work well with a 29 inch wheeled bike and has a max wheelbase of 48…

view full answer...

Answer 5

When the 2 inch shank adapter is installed on the Saris Freedom SuperClamp 2 Bike Platform Rack, the small silver hex screw should be installed on the smaller, rearmost hole of the shank. The threaded, anti-rattle, hitch lock will install on the…

view full answer...

Answer 6

I have the solution we're looking for in the Saris SuperClamp #SA4025F. It can support 2 bikes up to 60lbs each, to lighten the bike's weight you can remove the battery. The SuperClamp has a lower mounted support bar than the T2 Pro…

view full answer...

Answer 7

I went out to our demo area to take the overall measurements of the Saris SuperClamp bike rack #SA4025F when folded up. Side to side it measure approximately 48 inches. Front to back it measures approximately 30 inches. From the bottom of the shank…

view full answer...

Answer 8

You are correct. The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2", part #306-X7311, is compatible with your 2015 Volkswagen Jetta TDI. It has a maximum tongue capacity of 300 lbs and a maximum gross trailer weight of 2,000 lbs.…

view full answer...

Answer 9

For the most part they're the same. The only difference between the Tekonsha 119250 and the #119250KIT is that the KIT includes the #118151 wiring kit.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Socket Size and Tools Needed to Install Curt Trailer Hitch Receiver on 2015 VW Jetta Sedan

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching