Inno Tire Hold 2 Bike Platform Rack Review Video

Great question Gerard! The Thule Bike Adapter Bar #TH982XT could potentially pull the seat loose, but that would take either going over some pretty rough terrain for a prolonged time, or a whole lot traveling without checking on the bike. I will…

Any bike rack will require some degree of lifting to seat the bike within the carrier. A hitch mounted platform type rack is definitely the right choice when being concerned about lifting height; especially if you already have a hitch installed on…

Thanks so much for your purchase of the Inno Tire Hold 2 Bike Platform Rack #INH120. And that is a good question about how the rack is secured to your hitch, as it doesn't have a traditional hitch pin that goes all the way through, so…

You will always have trouble loading the second bike if your first bike is placed on the rack at that angle. The Thule Bike Adapter Bar for Women's and Alternative Frame Bikes, part #TH982XT, should be used around the stem and the seat post…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is a certain way that the Inno Tire Hold 2 #INH120 pin goes in. It has a specific shape so you will have to rotate that pin until it hits the right spot and then it'll come out no problem. I've included a video for you and around the…

The same hitch pin is used on the Inno Tire Hold 2 Bike Platform Rack #INH120 when used in the 2 inch and the 1-1/4 inch configuration actually. I attached a picture that shows the pin and the 2 inch adapter in relation to the shank of the rack as…

I reached out to the manufacturer, Inno, who told me you needed 2 inches of depth behind the hitch pin hole of the hitch to use the tire hold, which is the following part number: - Inno Tire Hold Bike Rack for 2 Bikes - 1-1/4" and 2"…

Thank you for the information. I see that your Buddy Bike Sport is 43 lbs and has a wheel base of 58.1 inches. For your 2016 Ram 2500, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65063 which has a 500 lb…

In looking at the 2023 Subaru Crosstrek it is unchanged from the previous 2022 model year that the Curt Trailer Hitch Receiver #C13382 fits. I recommend installing the T-One Vehicle Wiring Harness #118467 so you will be able to add Auxiliary Lights…

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

Yes, the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers part #RRVA180B-RRRLT600 will absolutely work with the RetraxPRO XR Hard Tonneau Cover w/ Trax Rails on your 2019 Ford F-250. It is actually designed…