Saris Bike Rack Recommendation for a 29 inch Wheel Bike with Long Wheel Base

Question

Question:

What is the Max wheel base the Saris racks can handle. I have a long wheelbase 29inch wheel bikes.

asked by: Al

0

Expert Reply:

I spoke to my contact at Saris and he told me that they have a solution for your bike.

What he recommended was the Saris SuperClamp EX2 Bike Platform Rack # SA4025F. This rack will work well with a 29 inch wheeled bike and has a max wheelbase of 48 inches. Check out the review video I attached as well.

expert reply by: Jameson C

0

Answer 1

I was able to find some pictures to give you a pretty good idea of what the EcoHitch Hidden Trailer Hitch Receiver #306-X7311 looks like after installation and with a bike rack as well. I reached out to EcoHitch see if I could provide you with the…

view full answer...

Answer 2

I have a great solution for adapting the 2" hitch receiver on your EcoHitch item #306-X7311 to accept a 1-1/4" accessory. You will want to use the Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver item #e63YR. This reducer…

view full answer...

Answer 3

Yes, the EcoHitch Hidden Trailer Hitch Receiver part #306-X7311 is a confirmed fit for a 2017 Volkswagen Jetta. In fact, I have a photo from the manufacturer on a GLI which is attached below.

view full answer...

Answer 4

I have added a cut out from the instructions that shows the socket sizes needed to install the Curt Trailer Hitch Receiver #C11474 on your 2015 Volkswagen Jetta sedan. You will need 10mm, 13mm, 3/4" and 11/16" sockets for the installation.…

view full answer...

Answer 5

I went out to our demo area to take the overall measurements of the Saris SuperClamp bike rack #SA4025F when folded up. Side to side it measure approximately 48 inches. Front to back it measures approximately 30 inches. From the bottom of the shank…

view full answer...

Answer 6

I have the solution we're looking for in the Saris SuperClamp #SA4025F. It can support 2 bikes up to 60lbs each, to lighten the bike's weight you can remove the battery. The SuperClamp has a lower mounted support bar than the T2 Pro which…

view full answer...

Answer 7

When the 2 inch shank adapter is installed on the Saris Freedom SuperClamp 2 Bike Platform Rack, the small silver hex screw should be installed on the smaller, rearmost hole of the shank. The threaded, anti-rattle, hitch lock will install on the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Saris Bike Rack Recommendation for a 29 inch Wheel Bike with Long Wheel Base

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching