Replacement Trailer Brake Assemblies for Part Number # 023-105-00

Question

Question:

I have a 023-105-00 break , which product do you have that will interchange with that? Thanks

asked by: Jody F

0

Expert Reply:

We have the exact brake assembly you are looking for with the part # 23-105 which is a left hand 6,000 lb Dexter brake assembly. The matching right hand side then is the part # 23-106. It's always smart to replace them in pairs if you can so that both sides will have equal braking performance.

expert reply by: Jameson C

0

click to enlarge

Answer 1

You're in luck Jim, we actually have a direct replacement for you. For the left hand assembly you'll want #23-105, for the right hand you'll want #23-106, and for the hub you can use #8-201-5. These are going to be the exact…

view full answer...

Answer 2

Electric drum brake assemblies for 6k and 7k axles both use the same 5 bolt mounting pattern. The 7k brakes will have a stronger magnet and will provide more braking. If used on a 6k axle a 7k brake assembly can be too aggressive but it could be…

view full answer...

Answer 3

The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb…

view full answer...

Answer 4

The biggest difference between the 6,000 lbs Dexter Trailer Brake Assembly part #23-106 for right hand and part #23-105 for left hand and the 7,000 lbs Dexter Trailer Brake Assembly part #23-181 for right hand and part #23-180 for left hand is the…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Replacement Trailer Brake Assemblies for Part Number # 023-105-00

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching