Fixing Factory Trailer Wiring On 2004 Nissan Titan That Has Been Cut Off
Question:
I have purchased a 2004 nissan titan from the highway department and they cut the tow package wiring off at the plug trying rehook up wires but want to plug back into oem plugs on veh is that possible with a 7 wire to pull a trailer that has brakes on it any help would be great i am at a loss and frustrated
asked by: David X
Helpful Expert Reply:
Depending on how far they cut back at the factory tow package, you may be able to just a 7-Way plug like part # C55774. If they just cut off the 7-way plug but not the OEM connector port under the bumper this will work. I have attached a photo of what you will need to look for. You did say that your truck came with a factory wiring harness but if you do not have the two relays behind the panel on your dash board to the left of your steering wheel then you will need to add those from the Curt Relay Kit # C57000 so please keep that mind.
If you get under your Nissan and realize they have cut the OEM wiring above the OEM connector port for the wiring and you have blunt cut wires then it will require some hardwiring with Hopkins Vehicle Wiring Harness with 7-Way RV-Style Connector part # HM41145. I have attached the wiring configuration of the plug. If you are still having trouble figuring out what wiring is left or if you have a different connector then the one pictured please send me a photo of your wiring.
White: ground wire
Red: reverse light
Black: auxiliary power
Blue: electric brakes
Green: right turn signal
Yellow: left turn signal
Brown: park/tail lights
Products Referenced in This Question
Curt Relay Kit for Nissan Armada or Titan Aftermarket Tow Package
- Accessories and Parts
- Trailer Wiring
- Relays
- CURT
more information >
Hopkins Vehicle Wiring Harness with 7-Way RV-Style Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Q&A: Can Both The 7-Way And The 4-Way On The Hopkins HM40920 Be Used At The Same Time?
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: How To Tell If a Ford Transit Has the Tow Package and Parts Needed To Add It
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Where Exactly Do Demco Fifth Wheel Rails Sit in Bed of 2024 Chevy Silverado 2500 Short Bed
- Q&A: Brake Switch Signal Without Tapping into Factory Wiring On 2021 Toyota Highlander For Brake Control
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 7-Way Trailer Wiring Harness for 2024 Hyundai Santa Cruz
- Q&A: Where do Fifth Wheel Rail Kits Generally Mount in Truck Beds
on Custom Fit Vehicle Wiring
